Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   RAM (http://www.hardwarecanucks.com/forum/ram/)
-   -   What Ram for Gigabyte 890FXA-UD5 (http://www.hardwarecanucks.com/forum/ram/37915-what-ram-gigabyte-890fxa-ud5.html)

Spikemaul November 12, 2010 11:11 AM

What Ram for Gigabyte 890FXA-UD5
 
I plan to buy a new MB and Processor in the very near future and I have no idea on what Ram to get. The MB is the Gigabyte 890FXA-UD5 and the processor will be the AMD 1090T. Please help me find the ram that I need. I'm going to be buying everything from NCIX so the Ram should also be from there.
Here's the link for the MB : GIGABYTE - Motherboard - Socket AM3 - GA-890FXA-UD5 (rev. 2.1)
Thanks in advance.

martin_metal_88 November 12, 2010 11:57 AM

Anything from G.skill in these series :
Flare, Trident, Pi
Patriot :
Sector 5, Viper Xtreme
Corsair:
Any seires of dominator
Mushkin:
Black line, Ridgeback enchanced ridgeback

zsamz_ November 12, 2010 12:47 PM

gskills or mushkin are you best bet
corsair is overpriced n patriot rma suks

dont buy cheap crap for amd;) the flair is best bet

martin_metal_88 November 12, 2010 01:02 PM

Quote:

Originally Posted by zsamz_ (Post 449457)
gskills or mushkin are you best bet
corsair is overpriced n patriot rma suks

dont buy cheap crap for amd;) the flair is best bet

Have done tons of RMA to Patriot and it haven't been this bad. You get a bad try zsamz?

I do agree that G.skill flare is your best bet. And theu look cool. You should concider the Pi to fit with your mobo.

Spikemaul November 12, 2010 03:30 PM

I hope that the tall heat spreaders of the Flare will allow me to install my Noctua NH-U12P vertically in a push pull orientation.

Behemoth- November 13, 2010 04:24 PM

Quote:

Originally Posted by Spikemaul (Post 449554)
I hope that the tall heat spreaders of the Flare will allow me to install my Noctua NH-U12P vertically in a push pull orientation.

I think you could be quite tight. I use the NH-U12P in a horizontal push pull with G.Skill Ripjaws and the fan needs to be a few millimeters higher.


All times are GMT -7. The time now is 05:47 AM.