Gigabyte GA-X58A-UD9. 7 PCI-e X16.

[boggtrotter59]

You would be lucky to get 4 dual slot cards on that board... depending on your case the bottom fourth card may not even fit... No way you'll fit 7...

[_dangtx_]

Originally Posted by Musabi

I believe they're single slot.

Ok I checked it out, some 'other' sites were saying they were single slots but I couldnt find any official stuff. If you look at it though it looks very thin, and in the pictures (the third and last link) when you are looking at it facing the 2xDVI/HDMI port it looks like a single slot.

EVGA | Articles | Pure Adrenaline Meets Visual Bliss
EVGA | Products
Product and Package Content Images

99% chance no nozzles installed








you might be onto something altough theyd need to be hooked up together to fit..i think.
wont be enough flow thru those in's and out's for all that heat tough....
interesting thought tough.

Originally Posted by Oversized Rooster

4 PCI-E slots are more than enough. What I'd really like to see is 12 or more SATA ports. And don't put the 7th and onward port on some crippled JMicron controller either!

99% or more? yup.
yes, some sata ports better not be used.

Originally Posted by boggtrotter59

You would be lucky to get 4 dual slot cards on that board... depending on your case the bottom fourth card may not even fit... No way you'll fit 7...

theres also one more molex at the bottom, but i guess you can somehow tuck the wire away

[boggtrotter59]

My bad... didn't look at the pictures...lol...

[Jackquelegs]

7x Watercooled GTX 480s?

+ cost of a new circuit breaker
+ a couple of these

[Musabi]

Since you would have more than 1 PSU you could just put them on different circuits and save yourself some money! Hahaha

[Jackquelegs]

That's what neighbors are for

[Musabi]

Originally Posted by Jackquelegs

That's what neighbors are for

HAHA oh you meant the MAIN circuit breaker!!

[Behemoth-]

there was some single slot Galaxy GTX 260 too... 7 of these could probably fit on a high watt/amp PSU -.- that + an i7 980x would probably do some decent PPP

¡¾Í¼¡¿Î´Ëì!±à¼*·Ñ¾¡ÖÜÕÛʵսGTX260+×é7¿¨SLIͼƬÐÀÉÍ-ZOLÖйشåÔÚÏß
it was already done, but they used 2 PSU. But i can't believe a silverstone strider 1500w with 110 amp can't power these.

Edit: And like some1 above said, I'dd like every Motherboard to be like this. You can have some space between you cards, you can fit yout 1x/4x/8x pci-e cards in there wihtout worrying about your dual gpu setup that could block the goddamn pci-e 1x/4x/8x slot you needed. Every slot could be running at 16x so you can place your cards swhere you need to .And may I had : death to the goddamn PCI cards.

[ayah]

Did anyone else notice the dual 8-pin plugs on the board? (looks like evga started a trend!)
Also, dual 4 pin molexes. (I presume for the crazy amount of PCI-E slots!)

[Kovok]

So this is a high end board, but they still include Floppy and IDE? Lose it already!