Go Back   Hardware Canucks > HARDWARE > Power Supplies

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old August 20, 2008, 09:39 PM
Dar_ell's Avatar
Allstar
F@H
 
Join Date: Aug 2008
Location: Vaughan,Ontario
Posts: 501

My System Specs

Default PC power and cooling silencer 610W

Hey , i just want to know since the PC power and cooling silencer 610W is kinda longer (or was it bigger i don't really remember) would it have any problem fitting into a CM690 or an Antec P182?
Reply With Quote
  #2 (permalink)  
Old August 20, 2008, 10:56 PM
NyteOwl's Avatar
Allstar
 
Join Date: Aug 2008
Location: Nova Scotia
Posts: 905
Default

I have a Silencer 750 in a P182. You have to watch the cables don't touch the fan blades if you have the fan mounted in the lower compartment but it fits just fine so the 610 shouldn't be a problem. I removed the tricool from the lower compartment and mounted a Scythe directly to the metal divider with soft mount grommets rather than use the plastic frame which also gave me a little bit more room. No idea on the CM690 but I would think it will likely fit there as well.
__________________
Obsolescence is just a lack of imagination.
Reply With Quote
  #3 (permalink)  
Old August 21, 2008, 03:10 AM
1Tanker's Avatar
Hall Of Fame
 
Join Date: Nov 2007
Location: Ontario
Posts: 1,170
Default

Quote:
Originally Posted by Dar_ell View Post
Hey , i just want to know since the PC power and cooling silencer 610W is kinda longer (or was it bigger i don't really remember) would it have any problem fitting into a CM690 or an Antec P182?
I have a CM690. My PSU is a Corsair VX550. I compared the specs of mine and the 610. They're both the same width and height...the 610 is 1.6 in.(40mm) longer(180mm L vs. 140mm L). Mine fits easily with lots of room to spare, so you'll be okay with the 610 in a CM690. GL
Reply With Quote
  #4 (permalink)  
Old August 21, 2008, 07:23 AM
Dar_ell's Avatar
Allstar
F@H
 
Join Date: Aug 2008
Location: Vaughan,Ontario
Posts: 501

My System Specs

Default

oh awesome, i was worried thanks for your help guys
Reply With Quote
Reply


Thread Tools
Display Modes