Go Back   Hardware Canucks > HARDWARE > Peripherals

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 22, 2009, 09:58 PM
Unknownm's Avatar
Top Prospect
F@H
 
Join Date: Aug 2009
Location: New Westminster, B.C
Posts: 209

My System Specs

Default Changing USB Polling Rate to 1000hz (or lower)

If your like me and hate default 125hz that all windows install (Unless you modify) here is a quick way to change your USB polling rate to 1000hz (1.00ms response time).


Note: Some mouses don't go all the way up to 1000hz. This is mainly in wireless mouses


Windows Vista & 7 64-bit

1. What you need: HIDUSBF.zip - dimr.exe (Direct Input Mouse Rate)

2. Extract HIDUSBF.zip & dimr.exe into a folder

3. Right click on "HIDUSBF.INF" find install (If Warning comes up about unsigned drivers don't worry)

4. Open up dseo13b.exe and check "Enable Test Mode"





5. Reboot

6. After Reboot you will see "Test mode Windows XXXX build XXXX" You can get rid of this but for now reopen dseo13b.exe and check "Sign a system file"

7. In the box type in "C:\Windows\System32\Drivers\HIDUSBF.sys". If correct a window will come up saying "The system file has been signed succesfully..."





8. Reboot

9. Reopen HIDUSBF folder and click on "Setup.exe"

10. Find your mouse click on it (it should be highlighted has blue) and at the bottom of the window check "Filter On Device" and select your Rate





11. Click Restart and open up dimr.exe. If it's still runs default 125hz reboot your windows Vista or 7 64-bit operating system again





12. To remove watermark open dseo13b.exe and click on Remove watermarks. It will link you to the website with the correct files to remove it



Windows XP/Vista/7 32-bit


1. Right click on "HIDUSBF.INF" find install
(Note sometimes with XP if you apply and the mouse stops responding in this case restart again and try again)

2. Open HIDUSBF folder and click on "Setup.exe"

3. Find your mouse click on it (it should be highlighted has blue) and at the bottom of the window check "Filter On Device" and select your Rate

4. Click Restart and open up dimr.exe. If it's still runs default 125hz reboot
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Post your USB Mouse Rate Unknownm Peripherals 13 August 26, 2009 06:10 PM
Command rate question Wurmer RAM 3 August 14, 2009 07:46 AM
Need a new LGA775 mobo (polling time) ...! Synth CPU's and Motherboards 13 September 3, 2008 08:12 PM
Rate my computer build? :) Skead New Builds 15 August 5, 2008 03:20 PM
ION iTTUSB 10 USB Turntable Reviewed @ Everything USB Supergrover Reviews & Articles from the Web 4 August 29, 2007 06:11 PM