Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Overclocking, Tweaking and Benchmarking

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 25, 2013, 10:55 PM
rjbarker's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Courtenay, B.C
Posts: 5,810

My System Specs

Default Procyon II @ 5Ghz Tri 680 OC'd - Benchmarks

Started fartin around again this evening and decided to "push" the HW a little bit further, grabbed a few Benchmarks.
Lookin at that HwBot Country competition, joined the HWC Team and started playing, unfortunately my A.D.D kicked in while I was trying to figure out how to post wPrime scores to HwBot.n here, needs me to focus more......

Okay the 3930K @ 5 Ghz (100 x 50 ) - a little bit of tweaking from 4.9 Ghz (Rock Stable):
- Upped my LL Calibration from Medium to High
- Upped vCore Offset from +.090v to +.125v ( Vcore Load from 1.39v to 1.46v )

LinX under load , Max Core temp was 82c on the hottest Core and around 70c on the coolest (not bad really considering 5 Ghz and 1.46v ), unfortunately I only got through 7 passes LinX, then "error" (no BSOD so a good sign, a little more tweaking...maybe some more vTT and a tad more vCore or try Non Offset Mode).170 GFlops at 4,000+ Memory useage.....but got thru a number of other Benches!

3DMK11 - 25,090
NVIDIA GeForce GTX 680 video card benchmark result - Intel Core i7-3930K Processor,ASUSTeK COMPUTER INC. RAMPAGE IV EXTREME

3D Firestrike - 16,130
NVIDIA GeForce GTX 680 video card benchmark result - Intel Core i7-3930K Processor,ASUSTeK COMPUTER INC. RAMPAGE IV EXTREME

Cinebench ver11.5 - 14.42 Pts

wPrime 1024M - 105.486 sec

wPrime 32M - 3.905 sec

3 X GTX 680 Classy's @ Core: 1267 Mhz / 3208 Mhz
331.58 WHQL
Evga Precision 4.2.1
In Precision - 120% Power target - +79 mhz Core / +204 Mhz Memory

Anyhoo, but all I got up then my A.D.D kicked in once more....playing with the dog now

Cheers guys..
Reply With Quote
  #2 (permalink)  
Old October 26, 2013, 05:10 PM
MVP
 
Join Date: Mar 2010
Location: 44N by 79W
Posts: 358
Default

Sounds like a pretty good setup to try for the first stage of the Country Cup. Your score is certainly closing in on the #1 spot in that category, with that setup at least.
Reply With Quote
  #3 (permalink)  
Old October 26, 2013, 06:10 PM
sswilson's Avatar
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 14,231

My System Specs

Default

Name:  hardware pron.jpg
Views: 62
Size:  23.0 KB


Hehehe... without being able to see that it's 3 cards in tri-sli that's some major hardware pron right there..... ;)
__________________
EVGA X58 3X SLI / i7 980X / 3X 4G Mushkin Blackline Frostbite / XFX Pro 1000W / EVGA GTX 680 SC+ 2GB / Intel DC S3700 200G / WD 6401AALS / TT Lvl 10 GT
Swiftech MCP655 WC Pump / EK XT 240 Rad / 2X Scythe Ultra Kaze / EK Supreme HF / Primochill Myriad Dual Bay Res / Dell UltraSharp U2412M

Gigabyte C1007UN-D / 2X4G Gskill PC3-10700 / Pico PSU / 2.5" 750G Toshiba HDD / Mini-Box M350 / 1X 19" BenQ / 1X 17" HP
Reply With Quote
  #4 (permalink)  
Old October 27, 2013, 09:36 AM
rjbarker's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Courtenay, B.C
Posts: 5,810

My System Specs

Default

I know my GPU's are pretty much maxes out n on the border of "will I get through this run".....the Cores anyhow, maybe able to squeeze a tad more out if the Memory.

As for the 3930k, my next Benchmark runs Ill see if I can get 5.2 Ghz , with 1.5v - 1.55v, Works better if I've had a beers ;)
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Completed Procyon II - 900D n Swiftech H320 rjbarker Case Mods, Worklog & Gallery 4 October 18, 2013 12:54 PM
Procyon II - Last Upgrades 2013 rjbarker New Builds 3 September 10, 2013 10:29 PM
Completed Procyon II -Reborn w RIVE, 3930K & 16GB Corsair Dominator 1866 rjbarker Case Mods, Worklog & Gallery 10 May 17, 2013 04:42 PM
Procyon Re-Born ...Not Really..a Face Lift!! rjbarker New Builds 4 April 28, 2013 07:25 PM
Procyon Is ALL Classy ;) rjbarker Video Cards 7 January 29, 2012 09:26 PM