Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Overclocking, Tweaking and Benchmarking (http://www.hardwarecanucks.com/forum/overclocking-tweaking-benchmarking/)
-   -   1055 OC specs - how do they look? (http://www.hardwarecanucks.com/forum/overclocking-tweaking-benchmarking/55141-1055-oc-specs-how-do-they-look.html)

great_big_abyss June 29, 2012 05:27 PM

1055 OC specs - how do they look?
 
FSB @ 286
multiplier x14 (stock)
core voltage: 1.51
temps max 60C running prime95

How do they look? My voltage isn't too high, is it?" I tried it at 1.5, but one of Prime95's workers failed, and when I tried folding it blue-screened after about 5 mins

BigPhatPaulie June 29, 2012 05:33 PM

That sounds alright but that temp is about as high as I would let it get.... actually I would either lower the OC a bit or get a better cooler to manage that

great_big_abyss June 29, 2012 05:38 PM

I'm not sure how I could get it cooler. I'm running a closed loop water cooler that is basically equivalent to a H70. Short of moving up to a H100, I'm not sure how I could improve that temp.

Is there some fan control software I could use? I have the push/pull fans hooked up to the PWMs on my board.

ilya June 29, 2012 05:59 PM

If you're folding a lot I would run closer to 1.4V.

great_big_abyss June 29, 2012 06:09 PM

Ahh, okay. Last thing I want to do is kill this processor.

I backed it off to FSB 270 and core voltage 1.42 for a total OC of 3.8

So far, temps at 54C and holding in P95...

I find temps while folding are typically lower than running P95 anyway...

BigPhatPaulie June 29, 2012 07:05 PM

Yea thats a lot safer and should still run fast:thumb:

great_big_abyss June 29, 2012 07:23 PM

What can you get your 1100T up to?

BigPhatPaulie June 29, 2012 07:44 PM

Ive tried and 4.0 is the max it seems for my chip :/ blue screens if i go any higher

Bloodystumps June 30, 2012 06:49 PM

Quote:

Originally Posted by great_big_abyss (Post 638508)
What can you get your 1100T up to?

I have had my 1090T up to 4.2 stable on custom W/C for almost a year . until now when I was installing water blocks on my GPU and reset my BIOS and lost my O/C .

Now I can't get it back and am having a hell of a time controlling my N/B from overheating it hits 63 running anything intense. I my have to remove it and reaply my Thermal paste.

great_big_abyss June 30, 2012 09:56 PM

Hmmm, what kind of CPU voltage were you running? Did you have to increase your NB voltage? How about DRAM? Also, what kind of temps were you showing. I realize that a custom waterloop will cool better than my closed loop system, but I'd still like to know, for comparison's sake. Who knows, maybe one day I'll attempt a watercooled creation of my own!


All times are GMT -7. The time now is 04:05 PM.