New Bios chip / Reflash

[ebdoradz]

I was looking for a new bios chip for my DFI nf2 and i can across Tmod on diy-street.

he sold me a new bios chip, with the bios of my choice for about 15-16$ CAD

so i touhgt that you guys could have looking around for this like i did

here's a link to is biosmedic forum

BiosMedic Forum - Powered by vBulletin

[sswilson]

Tmod's been making kickass modded bios' for DFI boards for quite some time.

While you're at it... have a look to see if he's still making the bootable bios flash cds with all of the best mods on them.....

[ebdoradz]

Originally Posted by sswilson

Tmod's been making kickass modded bios' for DFI boards for quite some time.

While you're at it... have a look to see if he's still making the bootable bios flash cds with all of the best mods on them.....

he is, he post it @ diy-street.com

and im using Tmod Cd for flashing my dfi board for at least 3-4 years

[Supergrover]

Man I miss the NF2 chipset, Good times, good times.

What heatsink are you running ebdoradz? Think I got a old TR slk-900 packed away I dont use, it's yours if you want it. Where does your XP-m top out?
My old 2500m hit 2.7 @ 2.1v ran 24/7 2.6 @ 1.90v in a AN7 Mobo.

[sswilson]

Originally Posted by ebdoradz

he is, he post it @ diy-street.com

and im using Tmod Cd for flashing my dfi board for at least 3-4 years

Heh... I remember how big of a step that was.... I was already leery of bios flashing (fried a couple of MSI boards with their legit bios'), and then here's all of these folks suggesting that I flash a non-spec modded bios to get the most out of my Ultra-D (seems to me it was a modded big-toe or something like that???). Never looked back though, that bios flashing CD was a godsend!!! :)

[ebdoradz]

Originally Posted by Supergrover

Man I miss the NF2 chipset, Good times, good times.

What heatsink are you running ebdoradz? Think I got a old TR slk-900 packed away I dont use, it's yours if you want it. Where does your XP-m top out?
My old 2500m hit 2.7 @ 2.1v ran 24/7 2.6 @ 1.90v in a AN7 Mobo.

i have manage to get it run @ 2.4Ghz 12*200 @ 1.7V with my old OCZ ram. since i've got my centon stick im nowe @ 230*10 @1.7V but im aiming 250*10

my heatsink was a SLK-900A (all copper) but i have change it for a thermaltake SilentTower 6 heatpipe bolt throught hsf, my temps are 31 idle 33 load

i also have another nf2 system

my server box is an Asus A8N7X, XP-M 1900+ @ 2ghz, 2x 512mb of Corsair XMS ddr400 TCCD, 9800pro, 200gh hdd bla bla

i have alot of fun with those NF2 they are realy picky with the ram setting but that the hard way to learn it

And how much for the SLK??? i might hook it up in my server box since i sold mine :S

[Supergrover]

And how much for the SLK??? i might hook it up in my server box since i sold mine :S

U pay the shipping, I'll have a look tommorow night and see if I still have it, I had 2 900 and 1 800 and know i got rid of 2 of them, I'll shoot you a PM and let you know. It should have everything but the "pads" but they are easy to getto up.