Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Overclocking, Tweaking and Benchmarking

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old August 25, 2010, 12:08 AM
Rookie
 
Join Date: Jul 2010
Posts: 20
Default Can't get RAM running with 2000Mhz without high QPI

Hi!

I have been trying to get the RAM running at its designed speed for quite a few days now without much luck.

My setup is:

F3-16000CL9T-6GBRH (2Gx3) 6GB
Asus P6X58D-E (Latest BIOS)
i930
Corsair HX750
F3-Spinpoint 1TB
XFX - 5870
Noctua U12P-SE2

I managed to get my system running for 6 hours after i had to abort with standard clock and XMP profile for the memory if i adjust the QPI to 1.5.
It seems very high. Is this out of your guys experience "normal" and within the norm ?
My temps where in the 80's. The guy from my local shop said thats far way to high, you should be under 60 (Sounds a bit low to me )

It pushes my heat already up a fair bit having the QPI that high so i won't be able to overclock the CPU too much with these settings.

I also managed to get it overclocked to 4Ghz with the ram running at close to 1700 Mhz with the temps beeing 76-77C with CPU and QPI at 1.35

I haven't tried the combination of both but i am a bit worried about the temps.
What is a good temp to run 24/7 id i wanna keep it for 3-5 years ?

Are these temps normal with a good Air Cooler?
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
RAM not running at right speed Vegas RAM 16 May 31, 2010 02:02 PM
[FS] MSI Wind U100 (2gb ram) with 3 and 6-Cell Battery (Running OSX 10.6) - $260 RLP06 Buy/Sell & Trade 7 March 18, 2010 08:03 AM
Running out of ram in Crysis canmx120 Troubleshooting 11 October 25, 2009 10:02 PM
Anyone running 8GB of Ram in the P5Q-Pro? Issues? The MAX RAM 7 February 10, 2009 07:19 PM
Running RAM 1:1 still the best? biff RAM 12 January 29, 2008 06:30 AM