Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Overclocking, Tweaking and Benchmarking

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old December 2, 2007, 01:59 PM
magictorch's Avatar
Hall Of Fame
Join Date: Apr 2007
Location: Annapolis Valley, NS
Posts: 1,867

My System Specs

Default Bad overclock settings?

FSB strap and PLL voltage on AUTO?

I have an ASUS P35 board+333stock FSB cpu. Bios is pretty much the same for them.

Does anyone ever leave the PLL voltage to AUTO when ocing? Manual options are 1.5-1.8.

DRAM frequency-set to 667, with an FSB of 400 it translates as DDR2 800 (1:1) in cpuz.

I have a FSB strap option on AUTO, but would like to know if I should use a manual setting?

Ive also DISABLED? Bad idea?
C1E support
Max CPUID limit
Vanderpool technology
CPU TM function
Execute disable bit, PECI.

I donít want to do any damage just yet and am just trying to get a feel for this new setup. Any advice would be greatly appreciated.. I was using this OC guide to help with adjustments
White Night:: i7920 (4ghz), Rampage III extreme (A1), Mushkin XP 1600 (9,9,9,24),SLI480., white MM horizon.
CPU: Feser 220 int.|Apogee GTZ|S.Res.rev2| MCP655.

GPU: PA120.3|S.Res.rev2|2x EK FC blocks| MCP655.
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Samsung 216BW settings? jasonmoreau Display Units 2 January 22, 2008 03:55 PM
Setting XFI Card and Ultra High Settings in BF2... Canadianguy Audio 10 December 4, 2007 10:12 PM
Bios saves OC settings, loads stock speed Mr. Cipher Troubleshooting 3 November 8, 2007 02:09 PM
initial settings Jim CPU's and Motherboards 3 July 23, 2007 02:17 PM
Check your default HD settings sswilson Troubleshooting 5 July 7, 2007 05:37 PM