Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Overclocking, Tweaking and Benchmarking (http://www.hardwarecanucks.com/forum/overclocking-tweaking-benchmarking/)
-   -   Lil' update... (http://www.hardwarecanucks.com/forum/overclocking-tweaking-benchmarking/2585-lil-update.html)

3.0charlie September 15, 2007 08:38 PM

Lil' update...
 
Finally. I have both rigs stable. Took me a while, but it's now a done deal.

Rig #1.

Gigabyte GA-P35-DS3L
Intel E6400
Mushkin EM PC2-6400 2x1Gb
Antec Trio 550W
Swiftech H2O-120 Premium kit.
Ati X300 PCI-E

The E6400 is running smooth @ 3.6 (450FSB), with 1.55V in BIOS. Temps are 27 idle, 46 load. Mem is running @ 900MHz, 5-5-5-15-38, with 2.1V.

Rig#2.

Gigabyte GA-965P-S3 (new, to replace the ECS mobo... :censored: )
Intel E2140
Mushkin XP-5300 2x512Mb
Antec 450W
Arctic Freezer 7
Ati Radeon 7000 PCI

The E2140 is running hot @ 3.0 (375FSB), with 1.4375V in BIOS. Still tweaking the voltage, to lower the temps: 27 idle, 65 load... I think I'll try lapping the AF7 too - I didn't like the contact area when I removed it from the ECS mobo. Mem is running @ 938MHz, 5-5-5-18-38, with 2.2V.

For both mem, I'm stuck with the multipliers. I can't go to the next one, it would run the Ram too fast - ex. the XP-5300 would run @ 1038 (533 is default...).

If I have better load temps once the lapping is complete, I'll try for 400FSB on the E2140, which I couldn't do before on the DS3L. Pics will follow tomorrow, if I can find that :censored: camera. It's great to see 2 mobos one on top of the other, in that HSPC Test rig.

John

pscout September 15, 2007 10:16 PM

Sweet!

Are they running linux? If they are they should produce some nice folding #'s especially with all the 2653's around atm.

Glad to see that mushkin 5300 working nicely :biggrin:

3.0charlie September 16, 2007 07:33 AM

Thanks again for the E6400 and the Mushkin mem - it's running fast, even though it's PC2-5300 mem! The E6400 is at ~1500 ppd, on 2653. The E2140 is at ~ 1430 ppd, on 2653 also.

Both are running on Vista.

3.0charlie September 18, 2007 06:34 PM

Here're pics of my little setup.

Work area. Yes, it is Ubuntu on the LCD.

http://www.hardwarecanucks.com/image...06d699aebe.jpg

The folding farm.

http://www.hardwarecanucks.com/image...06d69a3ab0.jpg

Rig #1.

http://www.hardwarecanucks.com/image...06d69a8a62.jpg

Rig #2.

http://www.hardwarecanucks.com/image...06d69a6e96.jpg

John

pscout September 18, 2007 06:46 PM

:thumb::bananafunky:


All times are GMT -7. The time now is 10:22 PM.