Post your Linpack max temps

[superj]

I'm curious what sort of temps people are seeing during Linpack stability testing.
Could you post you max temp in the following format:

• Temp
• Processor
• OC freq
• voltage
• Whether Load line calibration was used for voltage
• case, if relevant
• cpu cooler

You can download OCCT here, use the Linpack test and crank your fans.

Link to developers site: Download - OCCT Website english

Link to Console version of a Linpack tool, this one seems to produce a little higher temps, and does not have a shutdown at 80C:
IntelBurnTest v2.3 download from Guru3D.com

Real Temp is useful for giving as accurate temps as possible:
Real Temp - CPU temperature monitoring
(45nm processors do not provide accurate temp feedback at idle, as the sensors are only tuned to be accurate at TJmax)

[superj]

-75C
-Q9450
-3.8Ghz
-1.34volts (CPU-Z), 1.375 Bios
-Vendetta 2 with Thermalright backplate mount
-Antec 902 case with fans on high (during Linpack)
-LLC enabled

[Wall86]

Laptop (What I am using now)
-80C+ (Failed, got too hot)
-T6600
-2.2 Ghz
-1.2Vcore
-Stock Laptop cooling
-Standard Laptop Chassis

Laptop is a Dell Studio 17

Desktop (Currently being rebuilt)
-60C
-E5300
-4.1 Ghz
-1.7VCore
-CoolIT Boreas
-HAF 932

This rig is currently in pieces waiting for its case to be finished though.

[Jackquelegs]

• 68C
• Q9450
• 3.6
• 1.34v
• yes
• HAF 932
• See signature

[superj]

Originally Posted by Wall86

Laptop (What I am using now)
-80C+ (Failed, got too hot)

If you use this there is no high temp limit other than your cpu throttle:

IntelBurnTest v2.3 download from Guru3D.com

[tyreman]

[tyreman]

Settings for pevious screen shot.

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ............... Auto
CPU Clock Ratio ..........................10x
Fine CPU Clock Ratio.....................0
CPU Frequency ...........................3.60(360x10)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................Enabled
CPU Host Frequency (Mhz) ............360
PCI Express Frequency (Mhz) .....100 lock

C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................800 default
PCI Express Clock Drive................900 default
CPU Clock Skew (ps)....................0
MCH Clock Skew (ps)...................0
DRAM Performance Control
Performance Enhance................Extreme
Extreme Memory Profile (X.M.P.).....Profile 1
(G)MCH Frequency Latch............... 333
System Memory Multiplier ..............2.40b
Memory Frequency (Mhz) ..............800 864mhz. actual
DRAM Timing Selectable ................Manual

Standard Timing Control
CAS Latency Time................5
tRCD .................................4
tRP'....................................4
tRAS..................................12
Advanced Timing Control
tRRD..........................................3
tWTR..........................................3
tWR............................................6
tRFC...........................................52
tRTP...........................................3
Command Rate (CMD) .................2 T
Driving Strength Profiles
Driving Strength ............................1066

Channel A
Static tRead Value..........................7
tRD Phase0 Adjustment...................auto
tRD Phase1 Adjustment...................auto
tRD Phase2 Adjustment ..................auto
tRD Phase3 Adjustment...................auto
Trd2rd(Different Rank)....................auto
Twr2wr(Different Rank)...................auto
Twr2rd(Different Rank)...................auto
Trd2wr(Same/Diff Rank)..................auto
Dimm1 Clock Skew Control...............auto
Dimm2 Clock Skew Control...............auto

Channel B
Static tRead Value.........................7

tRD Phase0 Adjustment...................auto
tRD Phase1 Adjustment...................auto
tRD Phase2 Adjustment ..................auto
tRD Phase3 Adjustment...................auto
Trd2rd(Different Rank)....................auto
Twr2wr(Different Rank)...................auto
Twr2rd(Different Rank)....................auto
Trd2wr(Same/Diff Rank)..................auto
Dimm1 Clock Skew Control...............auto
Dimm2 Clock Skew Control...............auto

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
Load Line Enabled
CPU Vcore….……….....1.3750v
(cpu vid range 0.850v-1.36250v)
CPU Termination….....1.320v
CPU PLL…………………...1.500V
CPU Reference.…………0.836v

MCH/ICH
MCH Core…………….....1.240V
MCH Reference….…….0.756v
MCH/DRAM Ref.….....1.000v
ICH I/O………………......1.500V
ICH Core…………...….…1.200v

DRAM
DRAM Voltage ……....2.000v
DRAM Termination…..1.000v
Channel A Reference 1.000v
Channel B Reference 1.000v

Advanced Settings
Limit CPUID Max. to 3....................Disabled
No-Execute Memory Protect.............Enabled
CPU Enhanced Halt (C1E)................Enabled cpu throttles according to load on it.
C2/C2E State Support.....................Disabled
x C4/C4E State Support..................Disabled
CPU Thermal Monitor 2(TM2) ..........Enabled
CPU EIST Function..........................Disabled
Virtualization Technology.................Disabled Enabled if you use VMware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect .............Enabled
Other settings
Lan 1 enabled
Lan2 disabled
green Lan disabled
on board serial port 1 disabled
on board parallel port 1 disabled
On board sata/ide device disabled
onboard 1394 enabled
sata port 0-3 native mode enabled
sata raid ahci disabled
All usb 1.0/2.0 controller enabled
have usb mouse and keyboard all that enabled
floppy drive1.44 enabled…….I use one
floppy 3 mode support disabled
delay for hdd 0


Temps shown on OCCT while running at its maximum test phases observed are 62-64

Keep in mind thats under its full LinPak load possible test condition

per screen shot Custom Test Mode Max (90% free memory) Test Duration Time 4hr 0min.

And a 3hr test also displayed same parameters.

[tyreman]

[1Tanker]

-52C/10 passes IBT
-GA P35-DS3L
-Q9550-C1@3485(410x8.5)
-TRUE..2xScythe SS 1200rpm(68cfm/each) push/pull
-1.20 vCore
-CM RC690
-2x2GB Mushkin XP - PC2 8500(996599) -1025@5-5-5-12 2t @ 2.06v
-BFG 9800GTX+ OC@ stock(760/1885/2250) w/stock cooling
-Corsair VX550

[Putz]

Have my 920 d0 @ 1.2v for 3.87 ghz and it is usually 59-62 between the cores on LinX