Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Overclocking, Tweaking and Benchmarking

LinkBack Thread Tools Display Modes
  #21 (permalink)  
Old September 17, 2008, 03:44 PM
Eldonko's Avatar
Hardware Canucks Reviewer
Join Date: Apr 2007
Location: Calgary, AB
Posts: 5,442

If you move to 1600 your FSB jumps to 400 which is likely too high.

DRAM freq setting in BIOS will not change if you inc FSB, it's basically a ratio, however, your actual RAM freq will (as shown in cpuz). That make sense?
Donkeys kill more people annually than plane crashes or shark attacks.
Reply With Quote
  #22 (permalink)  
Old September 17, 2008, 04:10 PM
electronique's Avatar
Join Date: Sep 2008
Posts: 12

yes. Thanks :)
As shown in Bios, it is unchangeable - but the real ram freq changes automatically (if I inc FSB) and can be seen in prof softs. (cpu-z, freshdiagnose [...] )
Reply With Quote

Thread Tools
Display Modes