Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > New Builds

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 14, 2010, 01:02 PM
mataribot's Avatar
Top Prospect
Join Date: Oct 2010
Posts: 77
Default Question about my new build

I have a quick question about my new build. I am using a Corsair Obsidian and Enermax Revolution PSU. I can't seem to get the back panel fit on flush- it seems the psu 24 pin cable is just too thick. I am just looking for suggestions on how to fit the 24 pin cable behind the mobo tray. I would like any idea that does not require me to cut the case.
Reply With Quote
  #2 (permalink)  
Old October 14, 2010, 01:21 PM
martin_metal_88's Avatar
Hall Of Fame
Join Date: Apr 2009
Location: Quebec City
Posts: 4,172

My System Specs


Try to give it some extra lenght inside the case so you can bend it a bit more behind the side panel. Look at cable management picture on the web to see the best way to do it or review of the case. Reviewer will put a full system and since 24 ATX are all the same you can easely figure out how to do ;)

Edit : Look at how FiXT do it in the 700D review ( same as 800D ). Then try to do the same for the 24 pin and it should work.
Corsair Obsidian 700D Full Tower Case Video Review
[COLOR=black][SIZE=4][B]Ask for more
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Question About a New Build Mr.Charles New Builds 9 September 13, 2010 08:18 PM
Build for Work question jbyun04 New Builds 6 January 6, 2010 12:50 AM
Here's a build question.... Munroe New Builds 6 November 2, 2009 10:35 PM
Yet Another Build Question Surfer_2099 New Builds 9 October 21, 2009 05:54 AM
Quick Build Question FunkyJunky Video Cards 3 March 23, 2008 02:59 PM