Go Back   Hardware Canucks > NEWS & REVIEWS > Member Reviews

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 22, 2008, 09:57 AM
stoanee's Avatar
Hall Of Fame
F@H
 
Join Date: Jun 2007
Location: Lacombe Alberta
Posts: 3,248

My System Specs

Default Vantec NexStar-3 Hard drive enclosure review.

Attachment 1748
Vantec NexStar-3 External 2.5" Hard Drive Enclosure Review

Manufacturers product page-
Vantec Technology Inc.
Product Number-NST-260U2-BK
Price-
$29.99@memoryexpress.com
Availability-in stock


This review features a hard drive drive enclosure that admittedly has been around for a while, but I decided to submit it due to the timing of my laptops demise and the realization that other people could be in the same boat. My laptop had a motherboard failure that left me with components that, for the most part, could not be used anywhere else. One of the exceptions is the hard drive. I bought an enclosure to recover my data and then use the drive as a storage drive.

Features-(from the Vantec website)
-Aluminum Casing Cools Down Your Hard Drive
-Transfer Rates Up To 480MBPS w/ USB 2.0 (12MBPS w/ USB1.1)
-Easily Add Storage To Any System With USB
-Hot-Swappable: Plug And Play Without Rebooting
-Attractive Blue LED Indicates Power/HDD Activity
-USB Powered for drives up to 160GB

Technical specs

Model:-NST-260U2-BK
Interface:--IDE to USB 2.0
Dimension:-132 X 80 X 15 mm
Supports:-Window 98SE / ME / 2000 / XP
Mac OS 8.6 & Above

Maximum supported
drive height: -9.5 mm


Packing and accessories
Driver Disc, User Manual, 2.5" HDD Enclosure
USB / Power Cable, Screws, Carrying Bag
The enclosure was packaged in a box within a box that used a cardboard insert for separation of the components. The contents are light and there was no visible damage.

Attachment 1747
Attachment 1749
Attachment 1751
Attachment 1750

I unpacked the contents and was impressed by the small size of the enclosure and the smooth glossy finish of the enclosure.Attachment 1752Attachment 1753
I prepared to put my Toshiba 2.5"-40gb. IDE hard drive into the external enclosure.
Attachment 1754
Attachment 1755
Attachment 1756
Attachment 1757

The fit of the hard drive pins to the corresponding socket was tight and required enough force that I needed to carefully support the socket on the PCB
with my other fingers to prevent damage to it. As you can see there are four pins that do not connect with anything, I am not sure what they are for as this did not affect the operation of the hard drive.
Attachment 1758

The next step was to secure the hard drive to the PCB with four screws, slide the hard drive into the enclosure and secure it with two screws.
Attachment 1760
Attachment 1759
Attachment 1761

The included cable has two USB plugs that may both be plugged in at the same time to provide enough power for larger drives. In my case there was enough power supplied by using just one USB plug.

Attachment 1762

I plugged in the NexStar drive and it was detected by Windows XP immediately, without any tweaking whatsoever. For those who like bling there is a blue power light in the shape of the Vantec logo.
Attachment 1763
I recovered all the files I needed from my laptops demise then formatted the drive. I then ran some speed tests using HDTune to determine the throughput I was getting. From that I could not determine if I was getting the maximum advertised transfer rate for the external enclosure, but the results were consistent with the performance of the Toshiba's hard drive of 27.5 mbps (max)
There is also an included carrying case that has room for the drive and cable. This will help to prevent scuffing and scratches when not being used or transported.

Attachment 1764
Attachment 1765

All in all, the drive enclosure exudes high quality, is simple to assemble and use. It is up to you to determine if you want to spend the extra money to use on an older IDE hard drive. It does allow you to use a hard drive that may otherwise be sold for a pittance or scrapped. I have another laptop on its last legs and this external enclosure with undoubtedly be used for its hard drive also.


I am happy with this product and would not hesitate to use VanTec enclosures in the future.

"Highly Recommended"


__________________
heatware

Last edited by stoanee; February 20, 2012 at 09:19 AM.
Reply With Quote
  #2 (permalink)  
Old March 22, 2008, 12:45 PM
Hall Of Fame
F@H
 
Join Date: Jan 2008
Location: AB
Posts: 1,212
Default

Nice review :D

I Often suggest to folks that think their old laptops are useless to buy an external drive enclosure for their hard drives. Its amazing how many people think that the only way to get an external drive is to buy and expensive premade.

Its a nice looking enclosure too, and the carry case really tops it off. Its nice that it comes with a cable that allows you to increase the power input, but if you didnt have to use it i think i'd be switching out the cable for a normal one; that cable looks like it would catch on everything if it wasnt plugged in.
__________________

vista 64 on these rigs
Q9450 @ 3.5Ghz | E8400 @ 4.2Ghz
8gb Muskin Redline. | 2gb Kingston Hyperx
________________________________|_________________ ______________
EVGA 780i FTW ----\--||___||--/---- EVGA 780i SLI
Antec TP Quatro 1000W \ :==^==: / Antec TP Quatro 850W.
Nvidia 9800 GX2 X 2 SLI \|--o--|/ Nvidia 8800 GTS X 2 SLI
1X 500GB Western Digital. \_____/ 3X 150GB WD RAPTOR RAID-0
Reply With Quote
Reply


Thread Tools
Display Modes