Arctic Accelero S1

[SKYMTL]

Originally Posted by burebista

Hello omgwtf.
Let's be polite and speak in English.
/OT

We are a bilingual forum believe it or not. People are free to speak both English and French.

FYI: "Salut" means "Hello".

[burebista]

Originally Posted by SKYMTL

FYI: "Salut" means "Hello".

Thanks SKYMTL. I have no ideea what "Salut" means in my language. Me and omgwtf we are both romanians and we know each other from another romanian forum.

[Supergrover]

Originally Posted by SKYMTL

We are a bilingual forum believe it or not. People are free to speak both English and French.

FYI: "Salut" means "Hello".

Welcome to the forums BTW I speak in gibberish, just a heads up.

[donimo]

Hi, just thought I would add that I have this cooler, and in my Antec Sonata III case the 120mm fan is also in that spot, but only about 2cm away from the edge of the s1 cooler. I also have the "Turbo module" that is 2x80mm (I think) shroudless fans that clip on to the fins.

I recommend the Turbo Module as it is only 7 bucks more and takes about 2 seconds to install.

On my x1950pro with stock cooler I got 50*C idle and 80*C after running 3d06. With the s1 I get 28*C idle and 37*C load!!!!

These temps are so low I think its a glitch in rivatuner...

and it is SILENT, cant hear it unless you get your ear so close the shoudless blades cut your ear off...

[enaberif]

Originally Posted by donimo

Hi, just thought I would add that I have this cooler, and in my Antec Sonata III case the 120mm fan is also in that spot, but only about 2cm away from the edge of the s1 cooler. I also have the "Turbo module" that is 2x80mm (I think) shroudless fans that clip on to the fins.

I recommend the Turbo Module as it is only 7 bucks more and takes about 2 seconds to install.

On my x1950pro with stock cooler I got 50*C idle and 80*C after running 3d06. With the s1 I get 28*C idle and 37*C load!!!!

These temps are so low I think its a glitch in rivatuner...

and it is SILENT, cant hear it unless you get your ear so close the shoudless blades cut your ear off...

Use a few diff programs like everest if you can or even ATI Tool which will tell you the temps :) But it doesn't seem that far off as most GPU coolers are usually restrictive or not very good.