Go Back   Hardware Canucks > HARDWARE CANUCKS COMMUNITY > LinusTechTips Q&A

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old June 3, 2012, 10:51 PM
Rookie
 
Join Date: Jun 2012
Posts: 8
Exclamation Eyefinity help w/ xfx r7770

If you read thia i am a big fan of your youtube shows! anyways currently i have an xfx 5770 and maybe thinking of uprgading to the new xfx r7770 black edition. For the 5770 there are 2 dvi's, 1 hdmi, and 1 dp. on the r7770 thier is 1 dvi, 1 dp and 2 mdp. to setup eyefinity with the 5770 you would have to use both dvi's and the dp. how would i setup eyefinity with the r7770 for 3 monitors? would i have to use the dvi and 2 mdp or dvi and 1 dp and 1 mdp OR the dp abd 2 mdp. can you please help me? thanks. also maybe check out my channel? lol koreanPCgamer...
Reply With Quote
  #2 (permalink)  
Old June 4, 2012, 05:30 AM
Arinoth's Avatar
Moderator
F@H
 
Join Date: May 2009
Location: Halifax
Posts: 8,607

My System Specs

Default

Well if you want to get decent frame rates with all the eye candy on in eyefinity you're going to want to want two cards. Mainly as you will be driving 3 times as many pixels in eyefinity then in normal single monitor gaming mode, this can put a lot of strain on a single card.

Also, 3 monitor gaming is where you want to have as much video ram (memory) as possible as a lot of games use between 1.5-2GB when in eyefinity/surround. Meaning I wouldn't really recommend using an AMD 7770 to drive eyefinity if on again you want all the eye candy on. You'll probably have to settle to low to maybe mid res. Personally I'd recommend going with 79xx series cards or 670/680 in sli (or the 690) as they will be able to handle everything you can throw at it. Eyefinity/surround is typically a more expensive experience then single card gaming, and cheaping out will result in a poor experience with them.

In order for eyefinity to work, one of your three displays must be connected by/via display port, either to a display port native monitor, or using an active display port to dvi adapter. There is no other way around it, and it will not work otherwise.
Reply With Quote
  #3 (permalink)  
Old June 4, 2012, 02:52 PM
Rookie
 
Join Date: Jun 2012
Posts: 8
Default

Sorry it's single dvi single hdmi and dual mini display ports. So I would have to use the dvi and dual mdp right?
Reply With Quote
  #4 (permalink)  
Old June 4, 2012, 03:07 PM
Arinoth's Avatar
Moderator
F@H
 
Join Date: May 2009
Location: Halifax
Posts: 8,607

My System Specs

Default

Yes you would, however my warning still stands for driving it on a single card, especially under 1.5GB of vRAM
Reply With Quote
  #5 (permalink)  
Old June 4, 2012, 05:13 PM
Rookie
 
Join Date: Jun 2012
Posts: 8
Default

Quote:
Yes you would, however my warning still stands for driving it on a single card, especially under 1.5GB of vRAM

yep thank a bunch!!
Reply With Quote
Reply


Tags
3 monitors , eyefinity , r7770 , urgent , xfx

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help with Eyefinity. Mena Troubleshooting 16 April 4, 2012 04:31 AM
Eyefinity fyshawk Display Units 10 February 23, 2011 03:53 PM
Completed SB P67 + Eyefinity writhen Case Mods, Worklog & Gallery 4 February 10, 2011 01:47 PM
Got my Eyefinity going on!!! ontariotl Video Cards 68 October 17, 2010 04:17 PM
eyefinity ... tzetsin Troubleshooting 3 May 3, 2010 09:57 AM