Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   LinusTechTips Q&A (http://www.hardwarecanucks.com/forum/linustechtips-q/)
-   -   Anidees Ai-6B Case Review (http://www.hardwarecanucks.com/forum/linustechtips-q/50422-anidees-ai-6b-case-review.html)

Safear January 13, 2012 07:39 AM

Anidees Ai-6B Case Review
 
7 Attachment(s)
Hey guys, im new on this forum....

Today i've got my new gaming case, the Anidees Ai-6B.
The Company is new to the case market and started off with this beauty...

the case:
Attachment 15667
the top and the front have a brushed steel finish

the front:
Attachment 15671
the door swings open to the left or right side.
behind the door is a preinstalled 140mm fan and another 120mm or 140mm fan can be installed.
all of the front mesh has dust filters and the front can be easily pulled off, for fan mounting or cleaning the fan dust filter. the 5,25 "drive bay covers can be opened by pushing the two buttons (located on the right and left side of each drive bay cover) inwards.

the top:
Attachment 15673
classic... 1x microphone and headphone jack, 4xUSB 2.0, 2x USB 3.0, HDD and power LED and a small reset and a big power button :)

the bottom:
Attachment 15669
dust filters and rubber pad feet.

the inside:
Attachment 15670

grommited (i have no idea how to spell this word...) cable management holes
a power supply mount with dustfilters on the bottom
completely removable HDD cages
Isolated HDD Bays and there is also a removable 5,25" to 3,5" adapter attached to the bottom 5,25" drive bay.
2x 120mm or 2x140 mm fans can be mounted on the top
2x 120mm or 2x140 mm fans can be mounted on the bottom if you figure out how to take off this damn last piece of plastic, which is left after you remove the top two HDD cages...
1x pre installed 120mm fan on the back.
A 1x Molex to 8xfan Adapter already built in. (my personal favourite :))

the back:
Attachment 15668
3x grommited (omg -.-) holes for watercooling (i dont know how big they are)
8x PCI Expansion Slots
1x extra slot at the right side for extra "whateveryouwanttoputthere"-things.

this is my dreamcase and it isnt expensive.
I got it for about 110. I think its something about 100$.

(yes, im not good at english :P)

AND
dear Master Linus please make a video review about that case. :)

Greetings
Safear

SKYMTL January 13, 2012 08:37 AM

Not available in North America unfortunately. But if you already have it, why do you want a review? ;)

Safear January 13, 2012 08:44 AM

because i want to share it with you all :)
a pre-review XD (sort of)

great_big_abyss January 13, 2012 09:02 AM

It is a very nice looking case. I've always been a huge fan of minimalist design.


All times are GMT -7. The time now is 06:20 AM.