System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Core temp's ?

Unklmo

Unklmo

Well-known member
Joined
Jun 3, 2007
Messages
160
Reaction score
0
Location
Mtl, Qc
xentr_thread_starter
just curiuos as to why there is such a big difference in the temp's displayed between Speedfan and CoreTemp ? i'm seeing a 15 deg difference.
 

Attachments

  • StressTemps 01.webp
    StressTemps 01.webp
    107.5 KB · Views: 545
G0 stepping C2Ds have a 100C Tjunction, as shown in CoreTemp 0.95, your version of SpeedFan is still using the 85C Tjunction that previous stepping C2Ds use, hence 15C exactly lower. If you were to open up CoreTemp 0.94, you would see a Tjunction reported as 85C and the temps would be the same as SpeedFan.

CoreTemp 0.95 is correct, SpeedFan is wrong...perhaps an update to SpeedFan is available that will recognize the G0 as a 100C Tjunction and show correct temps. Or you could simply offset the temps manually by +15C and it will show them correctly. HTH
 
3oh6 said:
G0 stepping C2Ds have a 100C Tjunction, as shown in CoreTemp 0.95, your version of SpeedFan is still using the 85C Tjunction that previous stepping C2Ds use, hence 15C exactly lower. If you were to open up CoreTemp 0.94, you would see a Tjunction reported as 85C and the temps would be the same as SpeedFan.

CoreTemp 0.95 is correct, SpeedFan is wrong...perhaps an update to SpeedFan is available that will recognize the G0 as a 100C Tjunction and show correct temps. Or you could simply offset the temps manually by +15C and it will show them correctly. HTH
Click to expand...

Thanks for the info. I have the same problem. Speedfan is 15c lower than coretemp 0.95. I have the latest Speedfan which is 432 i think.

BTW: Unklmo, you do know that you can get Orthos Beta which will stress Dual cores so you'll have to run only 2x Orthos ?
 
Patriote said:
Thanks for the info. I have the same problem. Speedfan is 15c lower than coretemp 0.95. I have the latest Speedfan which is 432 i think.

BTW: Unklmo, you do know that you can get Orthos Beta which will stress Dual cores so you'll have to run only 2x Orthos ?
Click to expand...

Doesn't the new Prime95 take care of all cores?
 
EDIT: Nope it does not. I have to set 4 instance to load 100%. 1 will load 25%. Maybe you gotta get the BETA version ?
 
Last edited:
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top