Applying 3M Di-Noc Carbon Fiber Film

[NSdeadly1]

There are also some aftermarket companies that offer pre-made covers for vehicle interiors. It might save you a few $$ and a few headaches as well.

[Squeetard]

Can you point me in the direction of some NAdeadly1?

[Supergrover]

Or you could have a local shop do. IIRC Bling here in penticton has done it for one of the young framers car a few years ago, there has to be a local shop closer. At the least they could probably point you to someone in Vernon.

[kyle_L]

cutting small holes in the film can be a problem, like with the iphone, but if you are cutting a hole out like in a fan grill or modders mesh you can cut a clean hole that is 1/8th inch in diameter. if anyone want to try using a piece of this in canada i have small pieces i can mail out so you can see how it works.

[Mnpctech]

for the dash trim, as shown you want to apply 3M Super 77 adhesive Spray, otherwise the di-noc may peel away from those tight corners and crevices. There is several guides and tutorials on YouTube by people who do automotive applications of the 3M di-noc that will give you direction, search results

apply 3m di-noc adhesive spray - YouTube

[Squeetard]

Originally Posted by Supergrover

Or you could have a local shop do. IIRC Bling here in penticton has done it for one of the young framers car a few years ago, there has to be a local shop closer. At the least they could probably point you to someone in Vernon.

I should pay you to do it, that keyboard looks incredible. I take it you popped out all the keys, then applied the di-noc and then cut out the holes? I'm going to get a piece from kyle and try it. Without the adhesive first, see if my xacto skills are up to the chore.

[NSdeadly1]

Just a quick Google search for carbon fiber dash kit... Chevrolet Dash Kits | Chevy Dash Trim | Chevy Wood Dash Kit | Chevrolet Wood Dash Trims | Flat, Molded, Carbon Fiber Dash Kits

[o320]

Good guide :)

[Mnpctech]

Thank you, Glad you liked it