Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Guides & How-to's

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 14, 2011, 02:33 AM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,951
Default check your front panel usb ports with multimeter

MB manual usb pinout. just have a multimeter to verify connections on case socket to MB usb header.

NOTE: power(5v) = vcc
and check only cable end (MB header plug) to socket with diode check setting on meter(zero means 100% connected, some meters beep) or (OHMs) resistance mode zero means 100% connected or continuity
Attached Images
Attached Images
   

Last edited by KaptCrunch; February 14, 2011 at 01:06 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Front panel header rock_meg Troubleshooting 12 January 18, 2011 07:08 PM
Front Panel advice Graysccale Audio 4 March 6, 2010 01:55 PM
Front panel ground? martin_metal_88 Troubleshooting 0 May 31, 2009 06:00 PM
cant plug in front panel usb and firewire? go flames go New Builds 11 April 8, 2009 02:16 PM
stacker 830 front usb ports problem... CraigHf Troubleshooting 4 April 13, 2008 07:07 PM