Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Guides & How-to's

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 6, 2011, 08:48 AM
KaptCrunch's Avatar
Hall Of Fame
Join Date: Feb 2008
Location: Ontario
Posts: 3,938
Default moniter screen repair

fixed a blinky viewsonic screen
working away after replacing all the caps on psu in LCD moniter cured the blinking, after moving stuff around some how i put a gough/ deep heavy scatch on mid center of screen

using girl friends clear nail polish (acrylic lacquer) to fill the crator and 600grit water paper with a old alu HS for flat surface

applied in thin layers with 5mins between till had a lump, let sit 6hrs then wet sanded it flat (note surface wetted)

up close you slightly notice the edge of nail polish but afar looks norm

mite also work on CRT

other use YouTube - NEW 2009 Meguiar's ScratchX 2.0 G10307

Last edited by KaptCrunch; February 22, 2011 at 03:51 PM.
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Scratched screen repair? clone63 Display Units 10 October 1, 2009 12:44 AM
Moniter Issue AmuseMe Troubleshooting 3 June 18, 2009 03:58 PM
is there a way to connect a laptop moniter to a PC Shadowmeph Display Units 8 April 15, 2009 11:40 AM
Could i dual screen with a moniter & a CRT TV? Kayen Display Units 5 July 28, 2008 12:43 AM