Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Guides & How-to's (http://www.hardwarecanucks.com/forum/guides-how-tos/)
-   -   lighting a window (http://www.hardwarecanucks.com/forum/guides-how-tos/22536-lighting-window.html)

WolfBane August 30, 2009 05:52 PM

lighting a window
 
hey guys i have a silly question ?
ok i am having my TJ09 window lazer etched and i want to know how do i light it so that the whole etching lights up?
i have a 12 inch blue cathode in my box now at the bottom and i think it will light up part of it .
but my question is is there a way to lightly drill small holes and install some blue LED bulbs so that it will all light up the same and only the etcdhing?

Dar_T October 12, 2009 05:05 PM

How thick is the window? If it is thick enough you can make some small 3mm led holes and wire them up.

Sushi Warrior October 12, 2009 05:36 PM

Put 3/5mm LED's around the perimeter of the plexi and it should just light up the etching.


All times are GMT -7. The time now is 10:59 PM.