Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Guides & How-to's

    
Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old December 15, 2012, 12:52 PM
sswilson's Avatar
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 14,781

My System Specs

Default

No guarantees but this is the link I came up with through google.....

APC USB cable schematic pinout and wiring @ pinoutsguide.com

Does anybody who made these back in the day have the pinouts saved?

Edit: if you read through the comments for that link the critical (and apparently not obvious) key is to use RJ50 not RJ45
__________________
MSI Z87I Gaming AC / i7 4770K / 2X 8G Gskill 1866 Sniper / XFX XTR 750 / EVGA GTX 680 SC+ 2GB / Intel DC S3700 200G / Seagate Barracuda 1TB
Inwin 904 / Swiftech MCP655-b / Alphacool NexXxos XT45 120 Rad / 2X Scythe GT AP-15 / EK Supreme HF / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / 250G Samsung 840 Series SSD / Mini-Box M350 / 1X 22" Dell IPS / 1X 22" HP

Last edited by sswilson; December 15, 2012 at 01:13 PM.
Reply With Quote
  #12 (permalink)  
Old December 15, 2012, 03:04 PM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,966
Default

pinouts.ru steve yes they should pay attention to PC side for some manuters had usb upside down

best use a USB a-b cable and cut off square end keeping the rectanguler end and follow colour

the shielding use on 4 (the alu strand wround)
Attached Images
 

Last edited by KaptCrunch; December 15, 2012 at 03:21 PM.
Reply With Quote
  #13 (permalink)  
Old February 4, 2013, 03:01 PM
Trial Member
 
Join Date: Feb 2013
Posts: 1
Unhappy

Hi Guys

I can't make this working i hope you can help...

Since here in Benelux the RJ50 plugs is impossible to find i decided to open up the UPS and solder directly on my 550 motherboard.

I found different pinouts though:

APC BackUPS CS/ES smart signalling cable распиновка и описание @ pinouts.ru
APC USB cable AP9827 : Pinout cable and connector diagrams-usb, serial rs232,rj45 ethernet, vga, parallel, atx, dvi...


I tried the first one and is not working...and i am not too sure about the pinout it looks like 1 and 10 pins are not correct...

Anyone can tell me where PIN 1 is on the Rj50 and where the 4 USB wires need to go?

Without USB the UPS is pretty useless to me...
Reply With Quote
  #14 (permalink)  
Old April 16, 2013, 05:08 AM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,966
Default

other diagram update from orginale ups cable P/N
Attached Images
   

Last edited by KaptCrunch; April 21, 2013 at 03:17 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shutting down two computers with one APC UPS Varroa Networking 4 February 16, 2009 05:41 PM
A-Data RAM zlojack RAM 11 December 7, 2008 03:22 PM
EFA DATA????????? rob123 O/S's, Drivers & General Software 5 July 3, 2008 07:27 AM
Sata Data Cable Sleeving ChuckleBrother Storage 7 April 11, 2008 07:32 PM