| ||||
|
Paul, I would double-check that tye-wrap on the upper tubing - it does not seem to be on the barb, but on the tubing itself. John
__________________ Main: GA-X58-Extreme - i7 920 - TX750W - Raptor - 3Gb DDR3-1333 Triple-Channel - GTX260 SLI'ed - TRUE - P182 HTPC: M3A78-EM - 5000+ X2 - HX520W - 'cuda 1Tb - XP2-5300 2x512Mb - 9800GT - SI-128 - Prelude - Moneual 932B |
| ||||||
|
Good eye John. From the pic it looks like you are correct.
__________________ Amd FX60 @2.9 Asus A8R32-MVP Deluxe 2 Gig Corsair XMS 4000PT 2 Ati X1900's @XTX Speeds 2 WD 160gg HD's in Raid 0 XFi Platinum Tt 680 Watt PSU SATA Plextor DVD (Liquid Cooled) Swiftech Apex Ultra and 2 MCW 60's Kandalf |
| |||||||
|
Oh yeah, I put that there on purpose. There is still another 2 zip ties on the barb itself. That one that is off the barb is there, because the tube is pushing Up on the barb, and without the extra tie, it would no get a good seal on the barb. That pic is deceiving. I should loosen it off though, as it is a little tigher than I need. Thanks for noticing though! You can see what I mean if you look closely to this one..
__________________ The Vortex H20 Case....not sure what to call it DFI X38 LT Xeon X3210 @ 3.2GHZ 1.30V PNY 9800GX2 (750/2200) 4GB Corsair Dominator 2x2gb kit DDR2 1066 5-5-5-15 2.0V Ultra X3 1000W PSU HT Omega Striker 2x500GB Hitachi RAID 0, 250 Seagate Sharp 32" Aquos 1080p Benq W500 1080i Pojector. Watercooling: Loop 1 - D-Tek Fuzion Quad Nozzle Bowed, MCR320+Zalman ZM-F3 Fans, MCP655, MCRES Micro. Loop 2 - DB-1, DD 9800GX2 block, MCW30, MCR320, tLine res. |
| ||||
|
Too much of a bend for such a short tube, right?
__________________ Main: GA-X58-Extreme - i7 920 - TX750W - Raptor - 3Gb DDR3-1333 Triple-Channel - GTX260 SLI'ed - TRUE - P182 HTPC: M3A78-EM - 5000+ X2 - HX520W - 'cuda 1Tb - XP2-5300 2x512Mb - 9800GT - SI-128 - Prelude - Moneual 932B |
| |||||||
|
Yeah, exactly. This seems to keep it nice and intact. Kinda like a mini Smartcoil.
__________________ The Vortex H20 Case....not sure what to call it DFI X38 LT Xeon X3210 @ 3.2GHZ 1.30V PNY 9800GX2 (750/2200) 4GB Corsair Dominator 2x2gb kit DDR2 1066 5-5-5-15 2.0V Ultra X3 1000W PSU HT Omega Striker 2x500GB Hitachi RAID 0, 250 Seagate Sharp 32" Aquos 1080p Benq W500 1080i Pojector. Watercooling: Loop 1 - D-Tek Fuzion Quad Nozzle Bowed, MCR320+Zalman ZM-F3 Fans, MCP655, MCRES Micro. Loop 2 - DB-1, DD 9800GX2 block, MCW30, MCR320, tLine res. |
| |||||||
|
how'd it melt?!
__________________ Mountain Mods u2 UFO Intel qx9650 @ 4.2 ghz 4x1 gb corsair dominator 1066mhz Asus p5e Evga 9800GX2 Xp pro on 2 seagate 320 gb, raid 0 Vista Ultimate on 2 seagate 250 gb, raid 0 Corsair 1000HX WC loop: mcp665, pa 120.2, dtek fuzion, DD 8800 gts full coverage, swiftech mcres-micro |
| |||||||
|
His Pump or something failed, and it melted the block...
__________________ The Vortex H20 Case....not sure what to call it DFI X38 LT Xeon X3210 @ 3.2GHZ 1.30V PNY 9800GX2 (750/2200) 4GB Corsair Dominator 2x2gb kit DDR2 1066 5-5-5-15 2.0V Ultra X3 1000W PSU HT Omega Striker 2x500GB Hitachi RAID 0, 250 Seagate Sharp 32" Aquos 1080p Benq W500 1080i Pojector. Watercooling: Loop 1 - D-Tek Fuzion Quad Nozzle Bowed, MCR320+Zalman ZM-F3 Fans, MCP655, MCRES Micro. Loop 2 - DB-1, DD 9800GX2 block, MCW30, MCR320, tLine res. |
![]() |
| |
| Thread Tools | |
| Display Modes | |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ati 1900XTX goes watercooled | Vinnie | Water Cooling | 11 | February 12, 2008 08:10 PM |
| Compact Watercooled Gaming Rig! (planning stages) | Cptn Vortex | Worklog | 9 | January 11, 2008 09:57 PM |
| Watercooled X2900 XTX pic | Babrbarossa | Video Cards | 12 | September 8, 2007 07:40 PM |
| Awesome evga Factory watercooled 680i | Babrbarossa | CPU's and Motherboards | 18 | March 22, 2007 01:49 AM |
| New Watercooled Setup | cdn_Madrach | Water Cooling | 41 | March 11, 2007 12:48 PM |