Go Back   Hardware Canucks > HARDWARE > CPU's and Motherboards

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old August 7, 2008, 02:56 PM
Rookie
 
Join Date: Aug 2008
Posts: 40
Default FSB AND MEMORYS TIMINGS (need expert help)

Where do i change FSb frequency?
An wherer do i put ram module's timings and speed(mhz)



The Screen i am getting is attached(please take a look)

Cpu ratio is the cpu multiplier?

Mike

P.S. I am using Asus Rampage extreme.
Attached Images
 
Reply With Quote
  #2 (permalink)  
Old August 7, 2008, 05:27 PM
magictorch's Avatar
Hall Of Fame
F@H
 
Join Date: Apr 2007
Location: Annapolis Valley, NS
Posts: 1,838

My System Specs

Default

You seem to be on auto-try changing DRAM timing to manual by pressing enter then it should open things up for you.

Take at look at this guide it will give you some idea of ASUS terminology and basic settings for overclocking:

C2D Overclocking Guide For Beginners P5K Add-On - HEXUS.community discussion forums

Be sure to follow the suggestions for disabling some of the cpu features otherwise you wont get very far on FSB overclocking. Im assuming the auto feature on the rampage extreme will take care of GTL reference voltages and the like while you get a feel for RAM timings, straps and FSB overclocking.
__________________
White Night:: i7920 (4ghz), Rampage III extreme (A1), Mushkin XP 1600 (9,9,9,24),SLI480., white MM horizon.
CPU: Feser 220 int.|Apogee GTZ|S.Res.rev2| MCP655.

GPU: PA120.3|S.Res.rev2|2x EK FC blocks| MCP655.

Last edited by magictorch; August 7, 2008 at 05:35 PM.
Reply With Quote
Reply


Thread Tools
Display Modes