Vista + QX6700 = 50% OC

[sizerkozak]

Well here it is...
I think this is as far as ill go this time...but i would like to go to 4.0 !
Still want to play with the memory i think and see if i can tighten it up
What do you think guys ?

Vista Ultimate
50% OC
QX6700 cpu @ 3600.00 Mhz
CPU V 1.4
Chiller liquid bath temp -5C
CPU idle temp -2C
CPU full load temp 15C
Multiplier = 12X
System Clock = 300
System Bus = 1200
DDR2 Mem @ 450 Mhz

[sswilson]

Looking good.

Is that a bios OC or a software one?

Those are fantastic results. I would be happy with that, but more is always better ;)

[Supergrover]

You know if you lived closer, I'd fin you and steal that rig.

What kinda front side bus is achievable on that board?

[sizerkozak]

Originally Posted by sswilson

Looking good.

Is that a bios OC or a software one?

Bios ...i used the ASUS AI tool just for the cpu temp
as i could not get anything to work properly in vista

Im using the ASUS prob now...it works as long as the temps dont go below 0c...or it freaks out

[sizerkozak]

Originally Posted by Misoprostol

What kinda front side bus is achievable on that board?

Good question... im not sure what the limits are even...guess ill do some reading

[sswilson]

Have you done any benchmarking with the mem yet?

There was a pretty decent guide to extended memory settings for DDR1, not sure if it would work with DDR2.

I managed to grab a full sec out of 1M superpi just by tightening up the extended settings.

[sizerkozak]

Originally Posted by sswilson

Have you done any benchmarking with the mem yet?

There was a pretty decent guide to extended memory settings for DDR1, not sure if it would work with DDR2.

I managed to grab a full sec out of 1M superpi just by tightening up the extended settings.

nothing with mem yet...thats this afternoons tweaking