Go Back   Hardware Canucks > HARDWARE > CPU's and Motherboards

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 14, 2010, 06:52 AM
botat29's Avatar
Allstar
 
Join Date: Oct 2010
Location: Montreal
Posts: 828
Default Asus P6X58D-E, is that good

after drain my loop , some water spill on my 1366 board, of course I don't notice it , and now , the board is dead, so I'm thinking to replace it with the P6X58D-E or P6TD Deluxe , or may be Rampage III Gene .... anyone have problem with one of those board.

thanks
Reply With Quote
  #2 (permalink)  
Old October 14, 2010, 09:57 AM
homer98's Avatar
Top Prospect
F@H
 
Join Date: Aug 2009
Location: Hamilton, ON
Posts: 130

My System Specs

Default

I have the P6X58D-E, im lovin it so far, everything works well, haven't had any problems. Been overclocking really well too. Havent had much experience with other mobo's but I definately am satisfied with the X58D-E
__________________
Reply With Quote
  #3 (permalink)  
Old October 14, 2010, 10:49 AM
Xeven's Avatar
MVP
F@H
 
Join Date: Aug 2010
Location: Vancouver, BC
Posts: 489
Default

I've had good success with the P6x58D-E, very stable board to OC with.
__________________

PSXeven. Batards of the World Unite!
The gap between happiness and utter misery is only but a few inches
Reply With Quote
  #4 (permalink)  
Old October 14, 2010, 12:39 PM
chrisk's Avatar
Folding Captain
 
Join Date: Jul 2008
Location: GTA, Ontario
Posts: 7,403

My System Specs

Default

regular old P6T has served me fine; I have two of them that OC well, and fold 24/7 with no problems.
__________________
Fold for team #54196
Reply With Quote
  #5 (permalink)  
Old October 14, 2010, 12:52 PM
Jackquelegs's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2008
Location: Burnaby, BC
Posts: 2,590

My System Specs

Default

Yep..have one over here. Easily pushed the 930 to 4.2ghz on a decently low voltage. Very recommended
__________________
Iapetos
Intel Core i7 930 D0 4.2ghz, Corsair XMS3 6X2GB DDR3-1600 CL 8-8-8-24, Xfire HD5870, Intel X-25M 34nm 80gb, Enermax Revolution85+ 1050W, Xonar D2X

Zephyranthes
E8400 4.0ghz, XFX 780i, Mushkin XP2 PC-6400, Antec Earthwatts 750W

Reply With Quote
  #6 (permalink)  
Old October 14, 2010, 07:40 PM
Hall Of Fame
 
Join Date: Apr 2009
Location: laval Qc
Posts: 1,072
Default

put 99% alcool when you spilled the water to clean it
let it dry for a day n

gl
__________________
maximus IV extreme @ 5.1 1.41v

evga e760 +920 4.8 water5.0+ on phase linx stable
gtx285 tri-sli
dfi ut-p35 lt
e8600@4.6 1.38v
too much ram
Reply With Quote
  #7 (permalink)  
Old October 15, 2010, 04:13 PM
botat29's Avatar
Allstar
 
Join Date: Oct 2010
Location: Montreal
Posts: 828
Default

Ok finally I get a Rampage III gene, just finish to install Windows and other stuff, very happy to see my CPU and Ram not affected , what a great board, the heat sink are firm on it not wobbling like many other Asus board.
But I keep in note the good comment on the P6X58D-E, if I get my hand another 1366 CPU, I may get this one.
Thanks everyone
Reply With Quote
  #8 (permalink)  
Old October 15, 2010, 06:39 PM
fishingfanatic's Avatar
Hall Of Fame
 
Join Date: Mar 2010
Location: Hamilton Ont
Posts: 1,249

My System Specs

Smile Cpus and Motherboards

+1 for the X58D-E works great, also no problems with OCing. The only issue I have is if you decide to sli or xfire 2 dbl slot cards, the 1st 2 lanes,(pci-e)x16, will have virtually no space between the cards, so extra cooling fan may be needed. Otherwise, great board 4 the price, very stable.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
ASUS p6x58D Premium versus Asus Rampage Extreme III Timid newbe New Builds 2 August 17, 2010 01:09 PM
Using ASUS p6x58D Premium or ASUS ROG in Crossfire Timid newbe New Builds 1 August 15, 2010 01:06 AM
Questions about ASUS P6X58D and ROG Extreme boards Timid newbe New Builds 2 August 13, 2010 07:32 AM
ASUS P6X58D-E X58 Shimakaze CPU's and Motherboards 2 April 30, 2010 12:24 PM