Go Back   Hardware Canucks > HARDWARE > CPU's and Motherboards

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old April 22, 2010, 11:29 AM
MVP
 
Join Date: Oct 2008
Location: Sunshine coast, BC
Posts: 489
Default x4 965BE temperature?

What I did was swap out the 940BE(kid has it now) for a 965BE all the parts are listed in my sig below. With prime 95 load temps shoot up to 53c (room temp 20c max, maybe cooler), cpu set to 18x200 1.4v, is 53c temp normal for tuniq 120? Idle is no problem depending on time of day 27c morning 31c later afternoon.

Thanks.
__________________
waiting for FX 8350 to arrive / Tuniq Tower 120/ R9 280X / G Skill 12800CL9D 4x4GBXL/ S12D 850w/ GA 990FXA-UD3 /WD640AALS Black, WD1TB FALS x1, / Dell IPS 1920x1080/ Win 7 64
Reply With Quote
  #2 (permalink)  
Old April 22, 2010, 12:18 PM
Top Prospect
 
Join Date: Jan 2010
Location: Toronto
Posts: 161

My System Specs

Default

I'd be happy with those temps. Load could be better but the idle temps look much lower then usual. Now overclock some more!
Reply With Quote
  #3 (permalink)  
Old April 23, 2010, 08:18 AM
MVP
 
Join Date: Oct 2008
Location: Sunshine coast, BC
Posts: 489
Default

I tried 19x200 @1.4v but it didn't last 10min in prime, got the bsod. I'm going to let the as5 set for a couple of weeks to see if load temp comes down then bump volts up a bit more.
__________________
waiting for FX 8350 to arrive / Tuniq Tower 120/ R9 280X / G Skill 12800CL9D 4x4GBXL/ S12D 850w/ GA 990FXA-UD3 /WD640AALS Black, WD1TB FALS x1, / Dell IPS 1920x1080/ Win 7 64
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
temperature bug phantom_jo Troubleshooting 3 August 3, 2009 04:31 PM
Temperature Too Low? curtispan CPU's and Motherboards 4 January 12, 2009 10:58 PM
Temperature problems =/ Dar_ell Air Cooling 3 December 29, 2008 08:32 PM
I need help with my e8400 temperature pSop CPU's and Motherboards 11 December 17, 2008 08:14 PM
Max temperature Vinnie Overclocking, Tweaking and Benchmarking 4 November 28, 2007 09:08 PM