Go Back   Hardware Canucks > HARDWARE > CPU's and Motherboards

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old December 26, 2009, 02:06 PM
Varroa's Avatar
Allstar
 
Join Date: Nov 2007
Location: National Capital Region, Canada
Posts: 744

My System Specs

Default Re-mounting 775 backplate

Hi, I am in the process of replacing my motherboard and I need to move the 775 backplate to the new motherboard. When I removed the backplate from the old board it left behind the foam/tape that was used to mount it. I can replace the foam with paper or rubber washers at each hole but I was wondering what I can use to at the center of the place, directly below the CPU. Can I use thermal pads? Double sided tape? Any suggestions would be great.

Thanks.
__________________
GAMER: Win7 Pro x64, I7 3770K (stock) (CM 212+), Asus P8Z77-V Pro, Gigabyte 7970 OC Ghz Edition 3 GB, Corsair Vengeance LP 4 x 4GB DDR3 1600Mhz, Crucial M4 120 GB + 256GB, Crucial M500 480 GB SSD, 1TB WD Blk, BRD, HX750W, Auz X-Fi Prelude, & Fractal Design Arc MIDI R2

Lenovo Ideapad Y510p: i7-4700MQ 2.4GHz (undervolted by 80mV), 16GB DDR3L-1866MHz, Intel GMA 4600HD / SLI'ed Nvidia Geforce GT 755M 2GB GDDR5, 240 GB Crucial SSD, 128GB M.2 SSD, 15.6" HD+ Glossy LED
Reply With Quote
  #2 (permalink)  
Old December 27, 2009, 06:28 AM
Dr_BenD_over's Avatar
Fallen Folder
F@H
 
Join Date: Jul 2008
Location: Nova Scotia
Posts: 2,418

My System Specs

Default

I used some adhesive backed cork/rubber spacing material.
__________________
All's well that's Haswell
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
[WTB] Asetek LCLC/Corsair H50 775 mounting kit CMetaphor Buy/Sell & Trade 11 November 6, 2009 05:47 AM
[WTB] Backplate (local) DenisS Buy/Sell & Trade 2 September 23, 2009 08:57 AM
[FS] Swiftech Apogee GTZ CPU block 775 and 1366 Mounting kit donkon Buy/Sell & Trade 7 July 18, 2009 01:34 PM
Backplate question DenisS Air Cooling 4 April 5, 2009 09:06 PM
thermalright backplate owners Zippoh Air Cooling 3 December 15, 2008 06:05 PM