Go Back   Hardware Canucks > CASES & COOLING > Cases

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old May 10, 2012, 06:23 AM
w0z's Avatar
w0z w0z is offline
Join Date: Mar 2012
Location: Halifax, NS
Posts: 29

My System Specs

Default Painting the inside of a Cosmos S..

Hello HWC's,

So i am tired of the look of the Cosmos S and would like to paint it.

I am looking for someone that has done this for before to specify what i should buy

Reply With Quote
  #2 (permalink)  
Old May 10, 2012, 06:41 AM
Bungwirez's Avatar
Join Date: Feb 2012
Location: Mississauga
Posts: 475

My System Specs


nice tutorial over here...

Guide To Case Mod Computer Case Painting Page 1
I'm Bungz. mostly I bung things up. sometimes I play a doctor on TV.
Reply With Quote
  #3 (permalink)  
Old May 10, 2012, 01:49 PM
lowfat's Avatar
Join Date: Feb 2007
Location: Grande Prairie, AB
Posts: 8,313

My System Specs


Be prepared to spend a lot of time of you want a quality looking paint job. There are tons of painting guides out there, google for one. Some tips though, use tack cloth, and use it lots. Wipe w/ it between every single coat and wipe just before painting. Do a whole lot of coats, like 10+ of each primer and the paint and then clear coat if you are using it. You'll need to spend a lot of time wet sanding too if you want a nice finish clear of orange peel.

If you can afford it, maybe spend $75 - $100 on getting the interior powdercoated. It will look 11ty better and be very durable.
Big Lian Li
Forever Alone
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Painting.... ChuckleBrother Air Cooling 4 July 25, 2010 07:23 PM
Painting my Cosmos S ImmaPC Cases 17 January 5, 2010 04:46 PM
Painting a radiator netforce Cases 9 May 1, 2009 06:31 AM
Painting inside of a Antec 300 Zippoh Cases 2 January 1, 2009 11:17 PM
Cosmos 1000 VGA Fan Duct or Cosmos S 200mm fan? no_pulse Air Cooling 0 June 10, 2008 05:57 PM