Go Back   Hardware Canucks > CASES & COOLING > Cases

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 1, 2011, 04:45 AM
Allstar
 
Join Date: Jun 2008
Location: Toronto, Ontario
Posts: 600

My System Specs

Default HAF 932 BE vs HAF X

So, I will be returning my HAF 922 as I've had two cases with similar QC issues and I am still considering the HAF lineup because of its excellent cooling.

I am now looking at the HAF 932 Black Edition or going all out for the HAF X.
Now if the price difference is only around $40, is it worth just getting the HAF X over the 932 Black Edition?

I would think the 932 BE would be a tad quieter since it doesn't have the mesh panel on the side, but the X might be cleaner as it has some filters included?

Was hoping owners of both could chime in a provide the feedback ASAP as I will likely be picking up the new case tonight.

Thanks!
Reply With Quote
  #2 (permalink)  
Old March 1, 2011, 05:34 AM
EdHilario's Avatar
Rookie
 
Join Date: Oct 2010
Location: http://edhilario.ca in Markham
Posts: 28

My System Specs

Default

All I can say is that I love my HAF X.
Don't expect to lug it around anywhere but it definitely gets the job done. Houses eATX boards, long video cards, plenty of room for cable management in the back, grommets, holes for water cooling, dust filters, black interior, etc.
Very roomy inside.
The only thing I can say is I wish the motherboard tray had a larger cutout for removing coolers. Could just be my Asus board that's in an offset location for the socket but still. Should have been bigger :(
Reply With Quote
  #3 (permalink)  
Old March 1, 2011, 06:35 AM
Allstar
 
Join Date: Jun 2008
Location: Toronto, Ontario
Posts: 600

My System Specs

Default

Hey Ed, didn't know you were on this site (I'm the same Eluder from TSC).
I have the same issue with the cutout after reading reviews, but it seems like it's the whole HAF lineup that has this issue. Doesn't seem cut big enough for any of the newer boards (1155/1156).

My only concern about going to the HAF X is the sheer size, although from what I've read, it's not that much bigger than the 932.
Reply With Quote
  #4 (permalink)  
Old March 1, 2011, 09:54 AM
Pax Pax is offline
Top Prospect
 
Join Date: Oct 2008
Location: Windsor, ON
Posts: 74
Default

I've built 3 computers in HAF 932's and 3 in HAF X's. I prefer the HAF X. It looks much cleaner inside and I found it easier to route/hide cables. Both cases are big, so I wouldn't really buy based on the size of one vs the other.

I haven't done any side by side comparisons for airflow or temps, but both were very reasonable.

If the extra $40 is a concern, you'd be fine with the 932 BE. Both are great cases.

CM also sells some refurbed units that might get you a case for a few bucks off.
CM Store
Reply With Quote
  #5 (permalink)  
Old March 1, 2011, 10:25 AM
Allstar
 
Join Date: Jun 2008
Location: Toronto, Ontario
Posts: 600

My System Specs

Default

Nah, the $40 isn't a concern, just wondering if it's worth the extra, and so far sounds like it is.
I guess I'll see if both are on display tonight and make a decision, but I am leaning towards the X right now.
Reply With Quote
  #6 (permalink)  
Old March 1, 2011, 10:40 AM
bkh2's Avatar
MVP
F@H
 
Join Date: Jul 2009
Location: Coquitlam, BC
Posts: 265

My System Specs

Default

I own the HAF 932 and I absolutely hate not having dust filters. I'd go with the HAF X, even if it is only for the dust filters. From the reviews, it seems the HAF X has better cable management and better overall layout. This should be expected, since the HAF X is much newer than the 932.
Reply With Quote
  #7 (permalink)  
Old March 1, 2011, 12:57 PM
Rookie
 
Join Date: Mar 2010
Location: GTA Ontario
Posts: 40

My System Specs

Default

I have a Haf-X and love it!
I got a 200mm blu LED Megaflow fan for the side and moved the supplied side case fan to the top(2 top exhaust fans).
The case looks awesome and is very quiet with excellent air cooling results!

You can't go wrong with the Haf-X.
Reply With Quote
  #8 (permalink)  
Old March 1, 2011, 01:21 PM
MVP
 
Join Date: Sep 2010
Location: North Carolina
Posts: 306

My System Specs

Default

I have a HAF X case with a i7-930 in it and a H50 cooler. The temps are always below 40 C. I love the case and would recommend it. It is big and with the wheels on the bottom it will roll under a standard fold up table. One thing I had a little issue with is the mother board screws look like some of the other screws that come with it so before you put the mother board in, try the screws in and then pick out all the correct ones so you aren't guessing. I figure it will be the last case I buy for a long time and will just upgrade components as needed.
Reply With Quote
  #9 (permalink)  
Old March 1, 2011, 03:14 PM
AKY AKY is offline
Rookie
 
Join Date: Jan 2011
Posts: 18
Default

I think the Haf X would be worth it since it can be had for around $160 PM'ed.. I just bought it last week myself and I am waiting for it. Might as well spend the extra $40 to buy something that you will be happy with for the next 5 years.
Reply With Quote
  #10 (permalink)  
Old March 2, 2011, 01:42 PM
Allstar
 
Join Date: Jun 2008
Location: Toronto, Ontario
Posts: 600

My System Specs

Default

I ended up passing on both and going with a Lian Li PC-A70F.
I know it won't be as good as the HAFs for cooling, but it looks better (IMHO) and is so much lighter because it's all aluminum.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
HAF 932 stencil mo' power Cases 6 April 13, 2010 09:10 PM
HAF 932 WC Setup Pax Water Cooling 10 January 18, 2010 08:19 PM
[WTB] HAF 932 or Cosmos S miggs78 Buy/Sell & Trade 9 September 24, 2009 07:56 PM
[WTB] Coolmaster HAF 932 MrFoxx Buy/Sell & Trade 1 May 11, 2009 08:44 AM
Operation HAF Baked! Cooler Master HAF 932 Lithotech Case Mods, Worklog & Gallery 42 December 17, 2008 09:22 AM