Go Back   Hardware Canucks > CASES & COOLING > Cases

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old April 3, 2010, 05:15 AM
Rookie
 
Join Date: Mar 2010
Posts: 7
Default DimasTech BenchTables V2.5

Hello to all Guys, after following the Thread of Eldonko and getting some good feedback from canadians;)
i will post some pic of table directly here and some specifications and all the updating progress...
in this thread, let's say official we will welcome all the feedback from Canadian Customer.
I think that soon on HardwareCanucks we will manage to get a review sample for the editor in charge of pc case reviewing...

let's begin with pic and specs
Hello Guys, after long time, we're about to lounch the new V2.5, this version have all the features of the V2.0, together with the Easy V2.5 we will be launching also the Hard V2.5, completely matching the Easy V2.5 new table.
Here Below the Final Revision of Table Easy V2.5, this is the Standard Version, no customization, all the accessory like USB cable, FlexFan or other things are adding parts;)

Bench Table Easy V2.5 Specifications

-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)



Hardware Assembled Air Cooling, Only USB CABLE accessory



Bench Table Easy V2.5 Manual ENGLISH/AMERICAN



Developing Pics, preseries and parts not assembled, packaging sample and FlexFan first try
Bench Table Easy V2.5 Develop Pics
Reply With Quote
  #2 (permalink)  
Old April 3, 2010, 05:16 AM
Rookie
 
Join Date: Mar 2010
Posts: 7
Default

Bench Table Hard V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)



Hardware Assembled Air Cooling, No Accessory

Reply With Quote
  #3 (permalink)  
Old April 3, 2010, 05:17 AM
Rookie
 
Join Date: Mar 2010
Posts: 7
Default

From the Fusion of Bench Table Easy and Bench Table Hard, born EasyHard, this 2 bench tables can be used together or separate, it perfectly match through rubber feet and special screw on the top of Bench Table Easy, with that setup the Hard Bench Table can't move in any direction, like the older bench table.

Bench Table EasyHard V2.5 Specifications
hard part
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)
easy part
Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)




Hardware Assembled Air Cooling, No Accessory, only Usb Cable for Easy Part

Reply With Quote
  #4 (permalink)  
Old April 3, 2010, 05:18 AM
Rookie
 
Join Date: Mar 2010
Posts: 7
Default

reserved for User Mount best Off and custom color try;)
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dimastech bench station Eldonko Cases 27 March 16, 2010 04:10 PM