Go Back   Hardware Canucks > CASES & COOLING > Cases

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old June 12, 2009, 01:49 AM
Rookie
 
Join Date: Jun 2009
Posts: 22
Default Lamptron FC-2 fan controller mod (so it looks nicer on cases)

IKIKUINTHENUTZ here with a new completed mod

Lamptron FC-2 fan controller mod
MFG Product Link

I introduce my latest modification, my LED switch out and how to fix the not fully lid LED lights on the sides of the unit.

For those of you who don't know, this fan controller has an aesthetic problem of having the LEDs not show up in the corners. Below here is a Image I borrowed from overclock3d.com

As you can see, the unit uses bright blue LEDs and doesn't fully illuminate the unit at the edges.

When I bought my black colored FC-2 from performance-pcs
Lamptron FC-2 - 45 Watts Per Channel 6 Channel Fan Controller - Black Products Model: FC-2-BK [FC-2-BK] : Performance-PCs.com, ... sleeve it and they will come
I was thinking that my LEDs were too bright and I wasn't too fond of blue and so I decided to switch it out.

My original idea when I started with this project was to switch out the blue LEDs in favor for white LEDs, however during the process I learned some important facts and then I decided to fix the non side illumination issue along with switching out the LEDs.

First I unscrewed the whole unit apart


After doing that I decided to inspect the unit and I noticed this


If Lamptron indeed put a led on the sides, then why doesn't it show? I quickly plugged it in and I decided to look at the back of the unit while I was turning the knobs, indeed it lit up perfectly fine but why doesn't it show? The image below practically shows why, a piece of metal blocks the way.


Another shot of the unit with the metal off


While searching the internet for the LEDs, it was pita finding them in size of 2X5X6mm flat rectangular white leds so I decided to get these white 2X5X7mm from ebay
link

After I received them, it took 6 hours total to solder the old ones out and put in the new ones with just a soldering iron. My end result was worth it because it came out to be not too bright or blue.

Perfect


Now for the piece of metal, I went to my local hardware store and bought a brand new Dremel and a miniature hobby table so I can cut the little darn thing. Luckily with purchase of a new Dremel, they give you a sample cutting disk and grinding disk inside the box. I didn't have to spend extra money for more tools.

After cutting the edges off and grinding 1mm all around the openings to accommodate the new bigger LEDs, this was my end result. It's not perfect but it's well hidden anyways when it's put back together. This took me around 15 minutes to do.


Now the finished product images.



That's all :thup:
Reply With Quote
  #2 (permalink)  
Old June 14, 2009, 05:21 PM
Rookie
 
Join Date: Jun 2009
Posts: 22
Default

I was talking to nd4spdbh2 of OCF and he had given me an idea of how much light was bleeding out on to the back of the unit which was shown in my image. We talked about how to address it and then came up the idea of aluminum foil behind each led.

Now ill be honest, working with small bits of aluminum and then gluing it on a slippery surface in the smallest work space available with 2 needles as tool is worth a lot of headaches but in the end, it worked out fine in the end.



This resulted what I wanted, stronger front led lighting but what I didn't expect was the fact that it was too much, it was too damn bright just like Sunbeam Controllers! Ouch!

After consulting with nd4spdbh2 again and seeing forums posts, I noticed people complained about how the lighting wasn't all around in a circle. The idea of diffusing the light came apparent.

The installation is probably the most easiest mod I have done to this unit. All you need is some type of paper that still let light through, some glue, and a razor. In this case I used parchment silicone paper that is used in baking.

Unscrew the face plate and slap the paper on with some glue


Then use a razor and cut holes where appropriate for the knobs and screws.


Then put everything back together and huzzah! Finished!


Night time shot
Reply With Quote
  #3 (permalink)  
Old June 14, 2009, 05:25 PM
Phobia's Avatar
Hall Of Fame
F@H
 
Join Date: May 2008
Location: Richmond, BC
Posts: 1,157
Default

Interesting. I quite like the look of the new LEDs compared to the old ones. Good mod!
__________________
(whitty saying to be plagiarized at a later date)
Reply With Quote
  #4 (permalink)  
Old June 14, 2009, 06:58 PM
Prof. Dr. Silver's Avatar
Hall Of Fame
F@H
 
Join Date: Nov 2007
Location: Toronto, ON
Posts: 1,187
Default

Wicked stuff.... do you do car parts as well?
__________________
Hardcore Folding at it's BEST! HWC - TPU.... There can be only one team in front! TPU, can you smell our *sses already?
Reply With Quote
  #5 (permalink)  
Old June 14, 2009, 10:30 PM
Rookie
 
Join Date: Jun 2009
Posts: 22
Default

Quote:
Originally Posted by Prof. Dr. Silver View Post
Wicked stuff.... do you do car parts as well?
If you don't mind paper and glue

edit:
ps: no I don't

Last edited by IKIKUINTHENUTZ; June 14, 2009 at 11:55 PM.
Reply With Quote
  #6 (permalink)  
Old July 22, 2009, 05:17 PM
Rookie
 
Join Date: Jun 2009
Posts: 22
Default

one final (hopefully) mod

Acetone + Q-tip


Finished!

Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
zalmaan 6 fan, fan controller quikgp Peripherals 4 May 29, 2009 09:32 PM
Which fan controller? donkon Air Cooling 7 May 16, 2009 05:22 AM
fan controller help kyle_L Air Cooling 4 March 5, 2009 10:51 PM
Few new Mountain Mod cases! Sniper Cases 14 November 10, 2008 07:41 PM
Fan Controller Computergeek Air Cooling 5 July 9, 2008 06:16 PM