Go Back   Hardware Canucks > CASES & COOLING > Cases

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 4, 2009, 04:50 PM
Top Prospect
 
Join Date: Feb 2009
Location: Van
Posts: 54
Default Antec 900 Internal 240 RAD

Just installed my radiator 240 into my Antec 900 HD Bays and then used the floppy drive mount to attach two hard drives to the remaining 1.5 bays




Reply With Quote
  #2 (permalink)  
Old February 4, 2009, 05:18 PM
SugarJ's Avatar
Moderator
F@H
 
Join Date: Jan 2008
Location: Langley, BC
Posts: 6,103

My System Specs

Default

Can I make a suggestion? Move your brackets to the other side of the rad. Then you can hardmount the fans to the rad. The way it is now, air can divert and not push through the rad.

Here's what I did:



Cheers,
Gord
Reply With Quote
  #3 (permalink)  
Old February 5, 2009, 01:43 PM
Top Prospect
 
Join Date: Feb 2009
Location: Van
Posts: 54
Default

well i am planning to do push pull by having fans on both sides which is why its like that
Reply With Quote
  #4 (permalink)  
Old February 5, 2009, 01:48 PM
SugarJ's Avatar
Moderator
F@H
 
Join Date: Jan 2008
Location: Langley, BC
Posts: 6,103

My System Specs

Default

I see. I'd make sure your push fans were the ones tight to the rad though.

You could also bolt the bracket through the fan to the rad with some longer screws. (rad-fan-bracket order)
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
SugarJ's 900 Internal WC Project SugarJ Water Cooling 59 January 5, 2009 09:46 PM
Internal rad for Antec Twelve Hundred Companion_Cube Water Cooling 2 September 30, 2008 09:43 PM
3x MCR320's internal...DONE flclisgreat Water Cooling 11 August 31, 2008 03:48 PM
My Antec 900 internal water cooling project b1lk1 Water Cooling 8 March 24, 2008 10:35 AM
Internal watercooling kit kING4000 Water Cooling 18 October 15, 2007 11:05 AM