Go Back   Hardware Canucks > CASES & COOLING > Cases

LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old June 9, 2007, 10:20 PM
Join Date: Jun 2007
Location: BC
Posts: 2
Thumbs up I am building a new system using this case, and will eventually water cool it

I noticed a few people talking about this case from the perspective of adding a second ITX motherboard. I chose it because of its layout, and the capacity to fit a killer water cooling system in it.

For the record, there is a perfect spot at the front of the case to add a full 3 x 120 mm fan/radiator system. I am fitting a thermochill PA 120.3 radiator there.

The lower left side will house the pump and reservoir.
DFI LanParty UT P35 T2R Motherboard|Intel Q6600 Processor|Thermalright 120 Extreme CPU Cooler with Scythe SFF-21F 120 mm Fan|Patriot PC2-8500 2 x 1 GB DDR2 Memory|HIS Radeon HD2900XT Video Cards in Crossfire Mode|Auzentech X-Meridian 7.1 Sound Card| WD Raptor 150 and WD Caviar 500 GB Hard Drives|Samsung SH-S182L DVD Burner|Thermaltake Toughpower 1200w PSU|Silverstone TJ-09 BW Case
Reply With Quote
  #12 (permalink)  
Old June 10, 2007, 06:22 PM
sswilson's Avatar
Join Date: Dec 2006
Location: Moncton NB
Posts: 17,258

My System Specs



I'm dying to see it in action!!! :)
ASUS ROG Strix Z370-G Gaming (WiFi AC) / i7 8700K / 2X 8G XPG Spectrix D40 (3000) / XFX XTR 750 / ASUS Strix GTX 1070ti
AZZA Titan 240 / Custom WC / Intel 730 Series 480GB SSD / Intel 760p 512GB NVMe / Seagate Barracuda 1TB / ASUS SWIFT PG279Q

Asrock AM1H-ITX / AM1 Athlon 5350 / 1X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / Uncased 256GB Sandisk Z400S SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote

Thread Tools
Display Modes