Go Back   Hardware Canucks > CASES & COOLING > Cases

    
Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old November 26, 2008, 06:27 PM
BALISTX's Avatar
Hall Of Fame
F@H
 
Join Date: Feb 2007
Location: Ottawa, ON
Posts: 2,036
Default

Also depending on how steady of finger you have, I find using one of the plastic triggers helps for steady and evenly distributed passes. They are a couple of bucks and can be found with the paint.
__________________
Heatware
HWBOT
Reply With Quote
  #12 (permalink)  
Old November 26, 2008, 07:19 PM
Hall Of Fame
F@H
 
Join Date: May 2008
Location: London
Posts: 1,422

My System Specs

Default

So for the spray paint, just any regular old kind should do once the primer is on. I'll probably do it in my sunroom for the smell but it is cold in there!
Reply With Quote
  #13 (permalink)  
Old November 26, 2008, 07:24 PM
enaberif's Avatar
Hall Of Fame
 
Join Date: Dec 2006
Location: Calgahree, AB
Posts: 10,817
Default

Quote:
Originally Posted by JMCD View Post
So for the spray paint, just any regular old kind should do once the primer is on. I'll probably do it in my sunroom for the smell but it is cold in there!
Any spray paint will do, just make sure you shake it well and if the room is cold then I suggest the hot water trick.

On top of that being in such a cold room I suggest once you spray it to let it settle then move it to a warmer location.
Reply With Quote
  #14 (permalink)  
Old November 26, 2008, 08:16 PM
Hall Of Fame
F@H
 
Join Date: May 2008
Location: London
Posts: 1,422

My System Specs

Default

Quote:
Originally Posted by enaberif View Post
Any spray paint will do, just make sure you shake it well and if the room is cold then I suggest the hot water trick.

On top of that being in such a cold room I suggest once you spray it to let it settle then move it to a warmer location.
Sounds like a plan. Thanks for your help!
Reply With Quote
  #15 (permalink)  
Old November 27, 2008, 09:58 AM
DK2 DK2 is offline
Allstar
F@H
 
Join Date: Apr 2008
Location: GTA
Posts: 820
Default

Sunroom? I'd hang some kinda shield made of plastic or cardboard, damn spray paint gets everywhere.
edit: and while your at crap tire, get some masks too.
Reply With Quote
  #16 (permalink)  
Old November 27, 2008, 10:17 AM
"Quote This..."
F@H
 
Join Date: Nov 2007
Location: Hell
Posts: 4,005
Default

Tremclad takes forever to dry. Do you really need a rust paint?
Reply With Quote
  #17 (permalink)  
Old November 27, 2008, 10:48 AM
Hall Of Fame
F@H
 
Join Date: May 2008
Location: London
Posts: 1,422

My System Specs

Default

Quote:
Originally Posted by DK2 View Post
Sunroom? I'd hang some kinda shield made of plastic or cardboard, damn spray paint gets everywhere.
edit: and while your at crap tire, get some masks too.
Yeah I got plenty of junk (parents junk too) that I can spray against. I may have a mask left over from my construction job in the summer. Good call.
Reply With Quote
  #18 (permalink)  
Old December 15, 2008, 06:21 AM
Hall Of Fame
F@H
 
Join Date: May 2008
Location: London
Posts: 1,422

My System Specs

Default

Dumb thing I did. I haven't painted yet but I realize I should've bought a spray self etch paint instead of a can. It's better to spray obviously, but if I sand it afterwards anyways does it matter?
Reply With Quote
  #19 (permalink)  
Old December 15, 2008, 07:12 AM
BALISTX's Avatar
Hall Of Fame
F@H
 
Join Date: Feb 2007
Location: Ottawa, ON
Posts: 2,036
Default

As long as you use light coats instead of a heavy coat with a paint brush it should be fine. I would wait a week so the paint has time to cure before wet sanding it.
__________________
Heatware
HWBOT
Reply With Quote
  #20 (permalink)  
Old December 15, 2008, 07:18 AM
Hall Of Fame
F@H
 
Join Date: May 2008
Location: London
Posts: 1,422

My System Specs

Default

Yeah, thankfully time is not a factor as I still am waiting for stuff to be sent. Thanks!
Reply With Quote
Reply


Tags
case , mod , modding , paint

Thread Tools
Display Modes