Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Case Mods, Worklog & Gallery

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old January 16, 2013, 03:49 AM
Join Date: Jan 2013
Posts: 2
Default 600t Floor Mod

Hello mates ,
Bought a beautiful corsair 600t SE and am willing to mount a top 360 and 2 x 120 at floor.
My question is, does anyone has experiense with such a mod? Is it possible that the clearance between the floor and rad is'nt enough for the rads? Is it going to be more effecient that a 200mm on the front?
I promote the use of 2 1x120 at the floor (rotated so they are with their ports towards the outside of the case) over the 200mm front since more cold air is going to be introduced to the case by the free 200mm fan.

Thanks and sorry for the noobish question, Here is the overall plan

Attached Images

Last edited by jkanaks; January 16, 2013 at 04:04 AM.
Reply With Quote
  #2 (permalink)  
Old January 17, 2013, 08:19 AM
concinnity's Avatar
Top Prospect
Join Date: Nov 2012
Location: Washington D.C.
Posts: 133

My System Specs


Not sure about the bottom rads. But you'll definitely have to mod the top- Here's a thread doing what you need to do:
Getting information off the Internet is like taking a drink from a fire hydrant.
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
I dropped my Cpu on the floor, it`s fine?? deiu99 CPU's and Motherboards 5 November 22, 2011 02:18 PM
Droped My i7 on the floor :/ JORD4N CPU's and Motherboards 21 November 10, 2009 06:58 PM
Desk or Floor? Signal2Noise Cases 38 September 17, 2009 05:49 PM
Killing floor issue ToXic Troubleshooting 9 August 31, 2009 05:01 PM
Killing Floor cmac79 Gaming 10 May 17, 2009 09:00 AM