Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Case Mods, Worklog & Gallery

    
Reply
 
LinkBack Thread Tools Display Modes
  #31 (permalink)  
Old June 23, 2010, 08:14 AM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

New sponsor: Phenoptix



Phenoptix have agreed to sponsor the project with red 3mm LEDs!

Thank you very much for your contribution!
__________________
INVERTED by ToB1

Last edited by ToB1; June 23, 2010 at 08:20 AM.
Reply With Quote
  #32 (permalink)  
Old June 28, 2010, 09:05 AM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

The package from Phenoptix has arrived!

Phenoptix is sponsoring with 32 red 3mm LEDs that will be used to light up the feet and the back of the motherboard.





Thank you very much for your contribution!
__________________
INVERTED by ToB1
Reply With Quote
  #33 (permalink)  
Old July 13, 2010, 09:12 AM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

The package from Lamptron has arrived!

Lamptron is sponsoring withpower and reset switches, cables, FC6! :)

















Thank you very much for your contribution!
__________________
INVERTED by ToB1
Reply With Quote
  #34 (permalink)  
Old July 14, 2010, 01:26 PM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

New sponsor: Komplett.no



Komplett.no have decided to sponsor the project with Corsair H50, Silverstone SST-SOD01, Arctic Silver ArtiClean, Arctic Silver Alumina and Fractal Design EFS Fan Accessory!

Thank you very much for your contribution!
__________________
INVERTED by ToB1
Reply With Quote
  #35 (permalink)  
Old July 15, 2010, 03:28 PM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

Because the old feet came out a bit smal, i decided to make a set of new ones.

This update wont be that interesting since you've seen this part before.

This time I used a 57mm hole saw, which means that the diameter of the feet got about 1cm longer than last time.



__________________
INVERTED by ToB1
Reply With Quote
  #36 (permalink)  
Old July 29, 2010, 01:52 PM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

The package from Komplett.no has arrived!

Komplett.no is sponsoring withCorsair H50, Silverstone SST-SOD01, Arctic Silver ArtiClean, Arctic Silver Alumina and Fractal Design EFS Fan Accessory! :)


Corsair H50:












Arctic Silver ArtiClean:


Arctic Silver Alumina:


4xFractal Design EFS Fan Accessory:


Silverstone SST-SOD01:









Thank you very much for your contribution!
__________________
INVERTED by ToB1
Reply With Quote
  #37 (permalink)  
Old August 7, 2010, 03:00 PM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

I got wires, tips for det soldering iron, experiment card and 3mm LED-holders from Clas Ohlson yesterday, and I've done some work on the frontpanels.



The guy I'm planning to order plexi from is om vacation, but I think you get the idea of what the feet will look like...




The inner frontpanel...




The outer frontpanel...




I've cut the motherboard tray so it looks a bit better, and dont use to much of the space at the rear end of the case.


And here's a test to show you how the LEDs will be mounted on the motherboard tray...


I've also made a test on how the fan controller will be mounted on the front panel, and I hope to post som pictures of that soon.

What do you think about the project som far?
__________________
INVERTED by ToB1
Reply With Quote
  #38 (permalink)  
Old September 4, 2010, 05:57 PM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

A few weeks ago I got some new hardware, but unfortunately I've had a lot of things to do lately.

But anyway, here's some pictures of my new motherboard, CPU and RAM-modules :)

I've got a pair og WD Caviar Black 1TB 64MB as well, and pictures of does might come later.















- CPU: AMD Phenom X6 1090T
- RAM: Corsair Dominator GT 2x2GB 1600MHz
- Motherboard: Asus Crosshair IV Formula
__________________
INVERTED by ToB1
Reply With Quote
  #39 (permalink)  
Old October 14, 2010, 03:44 PM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

Sorry for taking so long, but here's a new update!

Testing the LEDs for the feet:



Mounting and testing of the LEDs on the motherboard tray. Unfortunately 2 of the diodes seems to me a bit defect, and on of them doesn't work at all :(










Mouting hinges on the to sidedoors:








Testing the holes i made for the locks:





Milled/Routered an edge so the motherboard tray will be mounted tighter:



76mm-hole for the rear 80mm fan:


The content of the package from performance-pcs.com. Unfortunately I got a 3mm thick panel of acryl instead for 5mm thick as I ordered. Therefor I ended up buying 6mm thick clear plexi for Clas Ohlson.










Hope you like the update, and I promise to post a new one soon!:)
__________________
INVERTED by ToB1
Reply With Quote
  #40 (permalink)  
Old October 17, 2010, 08:30 AM
ToB1's Avatar
Rookie
 
Join Date: May 2010
Location: Norway
Posts: 47
Default

Almost finished with the feet! :)










Hole for the fans on the top of the case...





Last to holes for the locks:



What do you think about the feet?
__________________
INVERTED by ToB1
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
TJ-07 Inverted ATX Mod Phobia Cases 0 September 9, 2009 08:02 PM
Inverted Motherboard tray Phobia Cases 7 March 23, 2009 07:42 PM