Ultimate WC system

[SugarJ]

Spacer here: K - Male-Female G1/4 Coupler, 7mm Spacer Adapter Male-Female G1/4 Coupler [ADT-XMF] - $4.99 : DazMode, Watercooling enthusiasts store

And here: Bitspower G1/4" Silver Shining IG1/4" Extender Products Model: BP-WTP-C40 [BP-WTP-C40] : Performance-PCs.com, ... sleeve it and they will come

[gingerbee]

just use a piece of tubing no? boil it then it should fit no problems

Bitspower G1/4" Silver Shining IG1/4" Extender Products Model: BP-WTP-C40 [BP-WTP-C40] : Performance-PCs.com, ... sleeve it and they will come

[MarkOne]

I found the spacer at Daz store, I oder also a longer tube for my reservoir, I find it short a little bit

K - Male-Female G1/4 Coupler, 7mm Spacer Adapter Male-Female G1/4 Coupler [ADT-XMF] - $4.99 : DazMode, Watercooling enthusiasts store


guy ... you need to be patient with WC build, always something missing, I made 4 or 5 orders with Daz and 4 or 5 with Frozen CPU too + 1 order at Ncix

[SugarJ]

That's the 100mm res tube you've got in there? I found the 150mm to work the best, the 250mm one is way too big for most builds.

And yes, it takes a lot of careful planning before I order any WC parts to make sure I don't miss anything. I sometimes do a mock up with little boxes and string to make sure I don't miss anything. Somehow I always do miss something anyways.

[BigDogg]

Originally Posted by MarkOne

here a view of the drain plug.. so I do not need to dismentle anything to drain

May I ask what you are using for the T and what drain port you are using.

Build looks great so far, very similar to what I am going to do with my Obsidian.

[MarkOne]

Originally Posted by BigDogg

May I ask what you are using for the T and what drain port you are using.

Build looks great so far, very similar to what I am going to do with my Obsidian.

here you will find the T and the plug

Buy The Best Compression Fittings, Rotaries and Barbs in Canada


similar...wait for the heat exchanger part

.

[BigDogg]

Originally Posted by MarkOne

here you will find the T and the plug

Buy The Best Compression Fittings, Rotaries and Barbs in Canada


similar...wait for the heat exchanger part

.

Hah, Yes no heat exchanger on my setup. However, I really like your drain so I think I will do something similar. I have a Danger Den fill port already so it might work out perfect. Your heat exchanger is really cool and should give you a good boost in cooling performance. Will be interesting to see the results.

[MarkOne]

Originally Posted by BigDogg

.... I really like your drain so I think I will do something similar. I have a Danger Den fill port already so it might work out perfect. ....

many people do not include drain plug, they have to unplug a hose .. I hate water spill

[gingerbee]

I have only built one loop with out a drain and res and it was a major pain in the butt to bleed