Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Case Mods, Worklog & Gallery (http://www.hardwarecanucks.com/forum/case-mods-worklog-gallery/)
-   -   My Pet Monster II worklog (http://www.hardwarecanucks.com/forum/case-mods-worklog-gallery/17479-my-pet-monster-ii-worklog.html)

kruzn4evr May 1, 2009 01:24 PM

My Pet Monster II worklog
 
14 Attachment(s)
I'm finally getting to work on my rig so I thought this time I'd take the time to put a little worklog together.

Here's the build parts:

i7 965 w/Alphacool Yellowstone WB, X58 Classified, 3x2GB G-Skill PI Black DDR3 1600 8-8-8-21, 3x GTX 280's w/Koolance Vid428 FC blocks, MCP355 w/XSPC Top, DangerDen Dual Bay Res., Thermochill PA120.3 push/pull , TT Tough Power 1200w, LG BluRay DVD (reader only), 2x OCZ Vertex 30GB SSD's, Seagate Barracuda 1TB HD, Samsung Spinpoint 750GB, CM HAF 932.

As you can see, I painted the case flat black in keeping with the colour scheme of the Classified's red & black. Hopefully the CPU block gets here early next week so I can get this puppy up and running. Right now, all the pics are basically a test fit to see how/where everything will get hooked up.

The rad was a little tricky for fit but after staring at things for awhile I found a safe way to mount it without even having to mod the case, although I was prepared to so if necessary. The tubing is a very snug fit, it just barely makes the turn out over the dvd without kinking. I'm using 3x Noctua P12's up top and 3x Scythe Slip Stream Kaze for the rad, there is just enough room for the board.

I'm also thinking of doing a lil mod job on one of the 280's, if I cut off the bottom part of the slot bracket I'll be able to use the bottom PCI-E slot for a 9800GT dedicated Physx card but I haven't decided on that one yet, I think it would be safe to say that the warranty would voided if I do it...lol

Well, thats about it for now :thumb:

netforce May 1, 2009 01:27 PM

:shok:

Spikemaul May 1, 2009 01:30 PM

Subscribed!.....and it does look like it's going to be a monster. :thumb: Good Luck with the build! :bananafunky:

slntdth93 May 1, 2009 01:44 PM

you dont need to cut the brackets for the gtx 280
grab a single slot nvidia card (maybe in another system?) and swap brackets

klaiboi May 1, 2009 02:02 PM

ya that's a monster alright....but how many FPS do you get in solitaire?

kruzn4evr May 1, 2009 02:02 PM

Ahhhh...I never thought of that...I don't think I have anything kicking around but maybe I can look for a cheapy card from someone....thanks slntdth93 :thumb:

Lol...solitaire?...probably around 3-400..lol

gingerbee May 1, 2009 02:04 PM

very nice monster and great paint too.

Mattu May 1, 2009 02:34 PM

That looks badass! nice work

3.0charlie May 1, 2009 02:42 PM

You have the pump tubed backwards. You have connected the outlet to the reservoir.

On a lighter note, this build demands black tubing.

dataxpert May 1, 2009 02:47 PM

agree black will be nice.....all true white will be even more

Quote:

Originally Posted by 3.0charlie (Post 188133)
You have the pump tubed backwards. You have connected the outlet to the reservoir.

On a lighter note, this build demands black tubing.



All times are GMT -7. The time now is 10:33 PM.