Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Case Mods, Worklog & Gallery

LinkBack Thread Tools Display Modes
  #81 (permalink)  
Old March 25, 2009, 08:12 AM
Liu Kang's Avatar
Join Date: Mar 2009
Location: Ottawa
Posts: 470

Oh, I will ;) You can take solice in the fact that your suffering has helped others (like me).

I do plan on modding the case, but nothing major:

- I'm going to run Feser rads, so I will expand the mounting holes for the rads, so I can accomodate 15mm spacing rather than the default 17mm ThermoChill spacing (I'll simply use black washers to secure everything in place, and hide the larger holes)

- I'll be running a single loop, so I will cut a hole in the bottom of the case, below the resevoir (swiftech micro res), so I can easily drain it.

- I will add a couple handles to the top panel, and some feet/castors.

All in all, just a lot of drilling

WORK KANG: Silverstone SG03 | EVGA x58 Micro w/ 920 @ 4.2Ghz | Sapphire 5970 | 12GB Dominator DDR3-2000 | 240GB Revodrive X2 | SilverStone ST650F
MINI KANG: BitFenix Prodigy | Asus P8Z77i Deluxe mITX w/ 2600K @ 4.5Ghz | EVGA GTX 680 2GB | 8GB Vengeance DDR3-1866 | 2x Intel 160GB SSD | Corsair AX650
KANGZILLA: Custom MM Ascension | SR-2 | 2x X5650 | 2x SilverStone ST1000F | 2x Intel 160GB SSD | 15x 120mm rads | Under construction...

Reply With Quote

water cooling

Thread Tools
Display Modes