Go Back   Hardware Canucks > CASES & COOLING > Air Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old July 5, 2008, 09:13 PM
MVP
 
Join Date: Jun 2008
Posts: 439
Default My Deltas are on the way

I finally ordered 8x TFB1212GHE.
It's the fan to end all fans.
Here's a specs sheet:
http://www.delta.com.tw/product/cp/dcfans/download/pdf/TFB/TFB120x120x38mm.pdf
Relevent specs:
220CFM
65dB
30W/2.5A

They're going on a pair of GT Xtreme 480s.
Reply With Quote
  #2 (permalink)  
Old July 5, 2008, 09:14 PM
enaberif's Avatar
Hall Of Fame
 
Join Date: Dec 2006
Location: Calgahree, AB
Posts: 10,637
Default

where did you order them from?

Delta 120x38mm TFB1212GHE Extreme High Speed Case Fan - Sleeved Products Model: TFB1212GHE [TFB1212GHE] : Performance-PCs.com, ... sleeve it and they will come

haaha sold out!

Last edited by enaberif; July 5, 2008 at 09:19 PM.
Reply With Quote
  #3 (permalink)  
Old July 5, 2008, 09:32 PM
Mibs's Avatar
MVP
F@H
 
Join Date: Jun 2007
Location: St. John's, NL
Posts: 311
Default

220CFM? Wow. What do you have in your loop that is going to require that much heat dissipation?
__________________
Intel C2D E6750 @ 3.52 GHz // EVGA 680i SLI Rev. A1 (P31) // 4 GB OCZ Platinum 800 MHz 4-4-4-15 // PC P&C Silencer 750 Quad // Antec P180 // EVGA 8800 GTS 512 // Samsung Syncmaster 226bw 22" LCD

WC Loop: D-Tek Fuzion V2 // Danger Den Maze 5 // Swiftech MCP655 // Swiftech MicroRes // Thermochill PA 120.2 + 4 x Noctua NF-P12
Reply With Quote
  #4 (permalink)  
Old July 5, 2008, 09:36 PM
MVP
 
Join Date: Jun 2008
Posts: 439
Default

Delta TFB1212GHE 120x38mm Extreme High Speed

EDIT: I'm gonna make an E2200 cry.
I'm probably gonna keep 4 on one 480 GT to run a real loop and split the rest to cool random computers.
I'm definatly gonna stick one onto an Ultra120 to see if it'll beat a 120CFM Panaflo.
Reply With Quote
  #5 (permalink)  
Old July 5, 2008, 10:07 PM
CanadaRox's Avatar
Allstar
F@H
 
Join Date: Feb 2008
Location: Scarborough (Toronto)
Posts: 614
Default

I've got one of these for benchies, and they are LOUD! I don't mind a bit of noise, but with one of these going you have to raise your voice a ton just to be heard a foot or two away. When I have it running in my room, it can be clearly heard anywhere else in the house and not as a small background noise but very loud and clearly audible. But all that being said, they move a TON of air. You see 220CFM and your like "Wow!" and then you plug it in, and feel it an your like times 10. And the pressure of these things is just insane. I had a cordless phone ~1ft from the front of the fan and I plugged it in (PC on the desk at the time) and it literally sucked the phone into the fan (lucky it didn't get in the blades).

I think you may have just been better off getting a DI/LN2 pot and some DI/LN2 and just pushing it to the extreme. I'm pretty sure adding the second rad is completely overkill as I doubt that the E2200 will be able to pump out enough heat for the second rad to even do anything.

Based on how long this post is, you know I've had a hard time describing how loud and powerful these fans are!

(PS. San Ace has a 300CFM fan, but its 76mm thick and dual motor, and 70dBA IIRC. I'll try to find the link.)
EDIT: here is the San Ace link: SANYO DENKI Web CATALOGE
70dBA, 86W, 300CFM, I want one!
__________________
Project: Black and White
i7 920 D0 | 3 x 2GB DDR3 | EVGA X58 SLI LE
XFX 4890 | Corsair HX750 | Corsair Obsidian

Last edited by CanadaRox; July 5, 2008 at 10:13 PM.
Reply With Quote
  #6 (permalink)  
Old July 5, 2008, 10:39 PM
3oh6's Avatar
Hardware Canucks Reviewer
 
Join Date: Mar 2007
Location: Edmonton, AB
Posts: 1,052
Default

i have to agree with CanadaRox, dual rads and 220CFM fans only get you so far. your still only cooling with ambient air. in order to really push processors you have to go sub-zero. chances are a single PA120.2 and a couple 120CFM fans would get you to the exact same spot with that E2200 as you will with your setup.

now, if your wanting to cool a pair of GTX280s and a couple quads in a Skulltrail rig...then your setup would be aces, but as it stands, the heat dump will simply not be enough to see the difference in your setup regardless of the cooling capacity.
Reply With Quote
  #7 (permalink)  
Old July 6, 2008, 12:55 AM
MVP
 
Join Date: Jun 2008
Posts: 439
Default

As mentioned in another thread, I have an E8400 and a Q6600 B3 to test out as well. Plus I'm sticking the whole works infront of a portable Air Conditioner.

And the E2200 isn't supposed to be "record breaking" I just want to make it cry.
Reply With Quote
  #8 (permalink)  
Old July 6, 2008, 06:26 PM
Top Prospect
 
Join Date: Nov 2007
Location: Edmonton, AB
Posts: 89
Default

I take it that the strong winds and thunderstorms all over Alberta today are no accident, death_hawk? :P
Reply With Quote
  #9 (permalink)  
Old July 6, 2008, 06:40 PM
3.0charlie's Avatar
3.0 "I kill SR2's" Charlie
F@H
 
Join Date: May 2007
Location: Laval, QC
Posts: 9,656

My System Specs

Default

65db. Jeez.
__________________
Hydro-Quebec is salivating...
Reply With Quote
  #10 (permalink)  
Old July 7, 2008, 12:23 AM
MVP
 
Join Date: Jun 2008
Posts: 439
Default

Those are my Deltas flying to me.
Reply With Quote
Reply


Thread Tools
Display Modes