i7 950 + hyper 212+ temps

[stoanee]

Originally Posted by FullArson

Hi, Thx for replying.

Here's my gear:

i7 950 @ stock speed
P6x48D-E Motherboard

I think you mean P6X58D-E right?
Some may disagree with me, but, I think the Hyper 212 is not good enough to adequately cool an overclocked 1366 I7. I had one on my 920 DO @ 4ghz, ran two fans but still had load temps in the high 70's. I switched to a Megahalem (cooled much better but still too noisy), tried watercooling, (still too noisy) and finally to a Noctua NH-D14. With that I was finally satisfied as it brought my temps down into the 60's and was quiet.

[yycraven]

All depends on which Cooler master Hyper 212 you get, there org Hyper 212 which I am using runs better then the new Hyper 212 plus.
But I do agree that the Noctua NH-D14 does run good.

[FullArson]

YES sry your right MY Mb is P6X58D-E. My bad hehe.
The problem is that i get those temps and my CPU is NOT OC.

Thx !

Originally Posted by stoanee

I think you mean P6X58D-E right?
Some may disagree with me, but, I think the Hyper 212 is not good enough to adequately cool an overclocked 1366 I7. I had one on my 920 DO @ 4ghz, ran two fans but still had load temps in the high 70's. I switched to a Megahalem (cooled much better but still too noisy), tried watercooling, (still too noisy) and finally to a Noctua NH-D14. With that I was finally satisfied as it brought my temps down into the 60's and was quiet.

[Your_friendly_gamer]

Here are my temps my cpu is slighly oc'd to 3.36 ghz, I just ran prime 95 for about 5 minutes or so and below is what I get, this is with HT on. Before you buy a new cooler, just try adding another fan, if it's still bad, then just spend around 60-100 bucks and buy yourself a nice cooler. MY megha was on sale from ncix for like 40 bucks I think, and I bought scythe slip stream 1900 rpm fans from canada comptuers for like 8 bucks each and so far so good, I wasnt very pleased in the beginning but then I researched and learnt that these ******* just run hot lol

[FullArson]

1: what is the différence between : '' CPUTIN'' and ''CORE #'' ?? Because there is 10C différence.
''CORE #'' are hotter than ''CPUTIN''

Is it normal or it's a bug ?

Take a look a the image.

That might be my problem?

Thanks

Originally Posted by Your_friendly_gamer

Here are my temps my cpu is slighly oc'd to 3.36 ghz, I just ran prime 95 for about 5 minutes or so and below is what I get, this is with HT on. Before you buy a new cooler, just try adding another fan, if it's still bad, then just spend around 60-100 bucks and buy yourself a nice cooler. MY megha was on sale from ncix for like 40 bucks I think, and I bought scythe slip stream 1900 rpm fans from canada comptuers for like 8 bucks each and so far so good, I wasnt very pleased in the beginning but then I researched and learnt that these ******* just run hot lol

[Your_friendly_gamer]

not sure what that means