Noctua se1366 and the vendetta 2

[Chris]

Please post your temp with the new fan when you got it installed. Thanks.

[bojangles]

Originally Posted by MrFoxx

This is what i ended up buying.

NCIX.com - Buy Scythe Ultra Kaze 120MM High Static Pressure Fan 38MM 3000RPM 133.6CFM 45.9DBA - DFS123812H-3000 In Canada.

I was looking at the detlas but i didnt se the need for 250+ cfm i dont overclock that much.

LOL. I hope noise doesn't bother you...

[MrFoxx]

Originally Posted by bojangles

LOL. I hope noise doesn't bother you...

it doesnt, but i got a contorller to go with it.

[Chris]

I lapped my Vendetta2 and remounted it with a bit less AS5, and managed to get 73c max on load @ 3.8Ghz with vcore set in bios at 1.25v and vtt at 1.2v.

[YukonTrooper]

Originally Posted by Chris

I lapped my Vendetta2 and remounted it with a bit less AS5, and managed to get 73c max on load @ 3.8Ghz with vcore set in bios at 1.25v and vtt at 1.2v.

With or without HT? Also, what method did you use to apply the paste?

[YukonTrooper]

Originally Posted by YukonTrooper

With or without HT? Also, what method did you use to apply the paste?

Bump.

[Chris]

Sorry I did not reply sooner. I was away. I put 2 thin lines of AS5 on the metal strip between the copper pipes. I did not bother filling the gap first as recommended, since I always put too much AS5.

I ran p95 last night for 10 hrs with HT on @ 190x20=3.8GHz. Max temp is 75c. So, vcore 1.25v and vtt 1.2v is good. I'll have to bring the ram up to speed next.