Go Back   Hardware Canucks > CASES & COOLING > Air Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 11, 2009, 08:41 AM
486's Avatar
486 486 is offline
MVP
 
Join Date: Nov 2008
Posts: 398

My System Specs

Default Xigmatek crossbow plate is slightly twisted

Xigmatek crossbow plate is slightly twisted. On even surface it rocks as two opposite ends are slightly higher than the other two (1-1.5 mm).

It should not be a problem, right?

I'd recon under the spring load it will take shape however tight I will screw in the bolts (I tried to untwist it with hands, it springs back to twisted shape).

How tight the screws should go in? Hand tight? Little wrench supplied tight?

It is my first backplate/screw mount. Trying to get the thing right the first time.
__________________
Silverstone TJ-08E
Seasonic X-660
Asus P8Z77-M Pro
Intel i7-3770
Kingstone HyperX 2 x 8GB
Crucial M4 256GB + 128 GB
Sapphire Radeon HD7970
Nec Multisync LCD2690WUXI
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Antec 900 (painted/slightly modded/and with decent cable management) + Introduction The MAX Case Mods, Worklog & Gallery 20 July 29, 2009 04:18 PM
Why dont benchmarks include slightly older hardware? muse108dc Video Cards 11 December 19, 2008 12:03 PM
CPU backing plate question kruzn4evr O/S's, Drivers & General Software 9 November 14, 2008 03:17 PM
Options on a deal gone slightly bad Eagle Eye Off Topic 16 May 22, 2008 08:51 PM
Copper Plate w/ Ultra 120 enaberif Overclocking, Tweaking and Benchmarking 6 February 5, 2008 05:36 PM