Go Back   Hardware Canucks > CASES & COOLING > Air Cooling

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old May 5, 2007, 07:04 AM
BALISTX's Avatar
Hall Of Fame
Join Date: Feb 2007
Location: Ottawa, ON
Posts: 2,063
Default Scythe Ninja Plus Rev. B

Will the Ninja Plus Rev. B be tall enough not to interfere with using the first ram slot on a DFI LANParty UT Ultra-D?
Reply With Quote
  #2 (permalink)  
Old May 5, 2007, 10:04 AM
Join Date: Apr 2007
Location: Vancouver
Posts: 19

I just intalled one on a Sapphire ATI Crossfire mobo. *EDIT* The fins do clear the ram slots 1 & 2 ...(I'm not sure if a ram stick could fit in slot 1). The fins partly blocks the cpu fan connector (between the fins and the blue ram sockets is the beige thingy) and the 8 pin 12V power connector (thick black cable at the top of the Noctua case fan). Also if I install a fan (a Antec P150 case), the frame of the fan will be touching and pushing down on the ram in slots 3 & 4. I've left the fan off for now and the temps are the same as before on a socket 939 3700+.
Attached Images

Last edited by alleycat8675309; May 5, 2007 at 11:59 AM.
Reply With Quote
  #3 (permalink)  
Old May 5, 2007, 11:28 AM
enaberif's Avatar
Hall Of Fame
Join Date: Dec 2006
Location: Calgahree, AB
Posts: 11,028

If you add the fan to the ninja you lose the 1st slot on a lot of boards including my asrock 478 board and a intel bx2 board.
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Scythe Ninja Copper Review Comment Thread SKYMTL Air Cooling 16 June 14, 2010 09:55 PM
Scythe Ninja Rev B. for those considering it - lots of pics 56k warning! low351 Air Cooling 17 March 28, 2008 07:28 PM
Scythe Ninja --> Scythe Ninja Copper vinister Member Reviews 12 February 27, 2008 11:19 AM