Go Back   Hardware Canucks > CASES & COOLING > Air Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 26, 2008, 09:39 PM
NyteOwl's Avatar
Allstar
 
Join Date: Aug 2008
Location: Nova Scotia
Posts: 905
Default High flow/pressure fans

They are not quiet or energy conserving but I don't think there is much these won't cool:

The Release of the 120 mm Square x 76 mm Thick Counter Rotating Fans* CR Type gSan Ace 120h
__________________
Obsolescence is just a lack of imagination.
Reply With Quote
  #2 (permalink)  
Old October 26, 2008, 10:22 PM
Infiniti's Avatar
Hall Of Fame
F@H
 
Join Date: Aug 2007
Location: Vancouver, BC
Posts: 1,388

My System Specs

Default

Imagine sticking those on two quadruple rads in push/pull config cooling just the CPU.. Wait.. Didn't Death_Hawk try that, but with Deltas?
Reply With Quote
  #3 (permalink)  
Old November 1, 2008, 05:51 PM
Lord_Anubis's Avatar
Rookie
 
Join Date: Oct 2008
Location: winnipeg
Posts: 15
Default

delta has the GFB1212VHW 120x76 fan for awhile now, but only puts out 220CFM@59.0 dBA. The Sanyo Denki according to their website puts out 300 CFM@70 dBA, wonder where one can get these from?

Pic of one of my 3 GFB1212VHW


Reply With Quote
  #4 (permalink)  
Old November 1, 2008, 06:22 PM
matsta31's Avatar
Hall Of Fame
F@H
 
Join Date: May 2008
Location: Montreal
Posts: 2,204
Default

Crazy, I guess noise is not a problem for you :)
__________________

Sold hardware again.....
Currently using WHS hardware....
Reply With Quote
  #5 (permalink)  
Old November 1, 2008, 06:30 PM
Babrbarossa's Avatar
Hall Of Fame
F@H
 
Join Date: Dec 2006
Location: New Brunswick
Posts: 3,673

My System Specs

Default

LOL - You could install that in your sink drain as a garberator
Reply With Quote
  #6 (permalink)  
Old November 1, 2008, 07:04 PM
Lord_Anubis's Avatar
Rookie
 
Join Date: Oct 2008
Location: winnipeg
Posts: 15
Default

Quote:
Originally Posted by matsta31 View Post
Crazy, I guess noise is not a problem for you :)
nah, I have 80 & 92 mm Vantec Tornado's running at full blast on my Xeon's & Opterons. I can't even hear the Delta., besides I don't really spend much time in that room.
Reply With Quote
  #7 (permalink)  
Old November 1, 2008, 07:16 PM
Supergrover's Avatar
Hall Of Fame
F@H
 
Join Date: Dec 2006
Location: Okanagan Falls, British Columbia
Posts: 4,250

My System Specs

Default

Quote:
Originally Posted by Lord_Anubis View Post
nah, I have 80 & 92 mm Vantec Tornado's running at full blast on my Xeon's & Opterons. I can't even hear the Delta., besides I don't really spend much time in that room.
Yup loud as F*** comes to mind.
I was looking at those deltas the other night but honestly have no use for 1 in my loop
__________________
R.I.P.

Quote:
Originally Posted by 3.0charlie View Post
My knuckles are bleeding from fishing through walls a new CAT6 network cable... I found fresh, untapped electrical outlets...
"It's all in the Reflexes"-Jack Burton
Reply With Quote
  #8 (permalink)  
Old November 22, 2008, 12:38 PM
cyberspyder's Avatar
Top Prospect
 
Join Date: Mar 2007
Location: Markham, Ontario, Canadeh
Posts: 121
Default

They are beastly for sure...availability wise, I'd limit these to Asia only...Sanyo Denkis are really hard to find here.
Reply With Quote
  #9 (permalink)  
Old November 22, 2008, 01:59 PM
odis172's Avatar
Allstar
F@H
 
Join Date: Oct 2008
Location: Ottawa, ON
Posts: 683

My System Specs

Default

Princess auto usually has highflow industrial stuff in stock. I picked up a 60mm x 38mm that flows 55cfm at 56db, can you say loud like a hairdryer!
__________________
Laptop: Lenovo T420 - Core i5 2520 - 8GB DDR3
Server: 2 xeon E5530 - Asus Z8N-D6 - 12GB DDR3 - 8x 500GB raid 50 - Perc 6/i - Compucase RA448A00
Reply With Quote
  #10 (permalink)  
Old November 22, 2008, 09:37 PM
MVP
 
Join Date: Jun 2008
Posts: 439
Default

Quote:
Originally Posted by Infiniti View Post
Imagine sticking those on two quadruple rads in push/pull config cooling just the CPU.. Wait.. Didn't Death_Hawk try that, but with Deltas?
I'm only pushing on a quad rad right now.
And my fans are only 220CFM per.
Reply With Quote
Reply


Thread Tools
Display Modes