 Water Cooling Budget Slashed
My overzealous water cooling plan of water cooling the CPU (E5200) and video cards got slashed in half due to a revamped budget. So it looks like I'm going to just be putting the CPU under water. So here is the parts list I have come up with.
Swiftech Apogee GTZ LGA775 CPU Water Block
Swiftech MCR220 Quiet Power Dual 120mm Radiator
2x Scythe Slip Steam Kaze Jyuni 120mm Fans
Swiftech MCP665-B 12v Pump
Swiftech MCRES-Micro Clear Hi-Flow Reservoir
Feser One Feser Tube UV Orange 3/8" ID 1/2" OD
3pkgs of Danger Den G1/4 to 3/8IN High Flow Barbs
Total - $267.90
My only question is can the 1/2 barbs on the MCP665-B be replaced?
__________________ "Though I walk through the shadow of the Valley of Death I shall fear no evil as my C8 Carbine is locked and loaded." Next Build: E5200 @ 3.6GHz (333x11) | Xigmatek HDT-RS1283 HSF | Biostar TP43D2-A7 | Mushkin Redlines DDR2-1000 @ DDR2-999 5-5-5-12
EVGA 9600 GT 512MB - 650MHz - 1800MHz - 1626MHz | Seagate 'Cuda 250GB 7200rpm SATA2 | Corsair VX550 | CM690 - Custom Atomic Orange Pearl
[Heatware]
[eBay]
[Rosetta]
BALISTX.com
|