Quote:
Originally Posted by MushkinGreg  C.I.A.2: Disabled
Performance Enhance:Normal (Try upto turbo later)
DRAM Timing Selectable (SPD): Manual
CAS Latency Time: 4
DRAM RAS# to CAS# Delay: 4
DRAM RAS# Precharge: 4
Precharge delay (tRAS): 12
*Below use highest numbers first, then optimising towards lower ones, once stable*
ACT to ACT Delay (tRRD): 4
Rank write to READ Delay: 11(3-5 will most likely work, if no post, try 9-11)
Write to Precharge Delay: 6(4-6 since 1GB sticks)
Read to Precharge: 6(4-6 since 1GB sticks)
Refresh to ACT Delay: 55(likely 25-35 since 1GB sticks, depends on chip though)
Static tRead Value: 9 (5-8 will most likely work, lower performs better)
Static tRead Phase Adjust - n/a
Command Rate (CMD): 2T
DDR2 Overvoltage Control: +0.3v
Test ram with memtest86+ or hci memtest for windows |
thanks man i installed my vendetta 2 today and that fixed my heat probs lol i dropped over 10c
. and i will try those and get back to u,