View Single Post
  #8 (permalink)  
Old September 21, 2008, 06:00 PM
Mr. Gruntsworthy's Avatar
Mr. Gruntsworthy Mr. Gruntsworthy is offline
Allstar
F@H
 
Join Date: Sep 2008
Location: Courtice, ONT
Posts: 750
Default

Quote:
Originally Posted by Squeetard View Post
the vendetta uses the same plastic push pins as the stock intel cooler. The bolt through kit holds much better.
i haven't had a problem with the push pins... my stock HSF (with stock thermal paste) keeps my E4600 at 37-39C idle, and maxes out at 50C max load.

Then again, it's all down to preference i suppose
__________________
MAIN RIG:
Case: CoolerMaster HAF 932
CPU : Intel i7-5820K 6-core @ 3.3GHz
RAM : 32GB DDR4 2400MHz (G.SKILL Ripjaws)
HDD : Main: 240GB SSD SATA2 (Intel) Storage: 3TB SATA2 (WD Green) Backup: 500GB External USB (Hitatchi)
GFX : Gigabyte GTX 970 4GB
PSU : 750W Corsair Modular PSU
MoBo: Asus X99-A
View : Acer H213H 21.5" @ 1920 x 1080 + random 4:3 monitor

Level/Game Designer, Programmer
http://mikeseguin.webs.com/

I run Durham 3D Printing, an online 3D Print shop!
Reply With Quote